|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
76.104.217.128
In Reply to: RE: Got some herbies spike decoupling gliders...jury is still out. posted by Crazy Dave on January 26, 2015 at 14:33:21
If you are willing to use premium wire and connectors, here's what I suggest. An 8 foot length of red wire, and an 8 foot length of black wire should be enough to build a 1m pair. Make sure the two Neotech Solid UPOCC Copper in Teflon 18 AWG wires are evenly/consistently wound around each other along the entire length of the twisted pair assembly. Firmly wrap the twisted pair with a layer of Oatey FASTape PTFE Thread Seal Tape, a dark gray thick-mil product available at Home Depot. Rather than rely on a damage-prone bare wire connection of small 18 AWG solid core wire with poor contact surface area, solder terminate the wires with Xhadow XH-SPD Spades and firmly secure the spades with high torque to the binding posts for minimal resistance. As an option, you can cover the twisted pair with Techflex sleeving of your choice for protection and appearance.
Neotech Solid UPOCC Copper in Teflon 18 AWG Red:
http://www.soniccraft.com/product_info.php/neotech-solid-upocc-copper-in-teflon-18-awg-red-p-1580
Neotech Solid UPOCC Copper in Teflon 18 AWG Black:
http://www.soniccraft.com/product_info.php/neotech-solid-upocc-copper-in-teflon-18-awg-black-p-1869
Xhadow XH-SPD Spade:
http://www.soniccraft.com/product_info.php/xhadow-xh-spd-spade-p-2107
Oatey 1/2 in. x 260 in. FASTape PTFE Thread Seal Tape:
http://www.homedepot.com/p/Oatey-1-2-in-x-260-in-FASTape-PTFE-Thread-Seal-Tape-306220/205469821
Follow Ups:
That looks like a great project. I think I will give it a try at that price. I like the "mummy strikes" look of the Teflon tape!
Dave
BTW, the purpose of the Teflon tape mummy wrap is to help mitigate resonance of the conductors, while keeping the conductors firmly twisted together throughout the test of time.
Also, if your budget allows for more pricey wire, VH Audio's 18 AWG UniCrystal OCC copper wire with AirLok insulation may be a more transparent sounding option for the application. The AirLok cellular FEP Teflon dielectric has an even lower dielectric constant than the solid FEP Teflon of the Neotech wire.
See link:
Thanks for reminding me. I was looking VH Audio's 18 AWG UniCrystal OCC copper a while ago. I have been thinking about a twisted pair of solid core wire for a while. That does look like very good wire and VH is a major sponsor of the Asylum. Chris gives a very clear description of the wire on his website.
A lot of the tope cable manufacturers do put a lot of effort into controlling resonance. Teflon tape does seem like an easy step to keep things working right, and it would heighten the mad scientist look of my system.
A long while ago I did run a twisted pair of solid core Rat Shack wire. It sounded good for what it was. It might be interesting to compare a identically constructed Rat shack wires to VH, although I suspect the VH would be substantially better. Still, it is good to hear for yourself, and unlike most endeavors like this, it would be very inexpensive. I have been very curios about the affect of better material, but usually, you cannot compare identical construction. This is getting very interesting!
Dave
I think your vintage Threshold CAS-1 power amplifier with Spendor BC-1 loudspeakers should be a suitable match when connected via *short-length* 1m DIY 18 AWG solid core OCC copper twisted pair speaker wire. The Threshold power amplifier provides high damping factor (150), and Spendor and other classic BBC monitors were often connected via simple small-gauge solid core bell wire by British DIY'ers back in the day. This is not to say 18 AWG is ideal for the application, but since the required length for your system is very short, I feel reasonably confident in this case. That said, if your Radio Shack wire is 18 AWG solid core, you might consider building a twisted pair wrapped with Teflon tape and solder-terminated with ordinary spades in order to hear the essential effect it presents before springing for expensive OCC wire and premium spades. I wouldn't want you to be disappointed by the results of pricey wire and connectors for a DIY experiment. Furthermore, building a low-cost prototype for a DIY cable project can be good practice before building a more optimized version for serious use.
I think that is an excellent idea, to try a low cost mock-up. Note that I have an M&K subwoofer (vintage always except CD), so the disadvantages of 18 AWG will not be apparent.
Dave
That's a good point. The Spendor has semi-rigid enclosure walls (as I've read) which may help provide a natural-sounding transition from main loudspeakers to subwoofer for good integration. Let the M&K handle the bottom end like it wants to. I used to use an M&K subwoofer. It was a musical sounding animal, but competed with the main loudspeakers implemented at the time which needed an active crossover filter.
Back in the day, the M&K/ Spendor BC-1 was a popular combination. There is a synergy. I am also letting the Spendors run full range and rolling in the M&K very low. I lucked into both (on separate occasions) for a song.
I found some RadioShack 18ga that I had lying around in a sealed package, and I am pretty sure I have some plumbers tape too. I was going to try it with bare copper striped wires, to see what I think. I will probably add spades later. I have some RadioShack spades but they are crimp on. I don't think they would be good with solder.
Dave
If the spades you have will allow a very good crimp with 18 AWG solid core, try that method rather than use bare wire. The solder termination is just to ensure a secure interface with good conductivity.
I will take a look, and if not, I am sure I can find something that will or will solder. Do you like lead-free for this application? I need to get some for an amp I am working on, regardless.
Dave
I use Wonder Signature Leaded Solder. It's the reformulated old-school Wonder Solder that's easy to work with and sounds good to me.
See link:
Price is very reasonable for a pound. Thanks for the recommendation!
Dave
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: