|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
81.167.153.96
In Reply to: RE: Recapping a Electrocompaniet 4.5 preamp ... is it worthwhile ? posted by mrplatte on July 16, 2014 at 08:38:12
" In my opinion they are neutral "
Hi Peter and thanks again
Now that you mention them i have seen them also in a bryston preamp
The original ones are lost unfortunately
But looking on ebay i see squared and cilindrical ones
Are equally ok ?" and I prefer them to MKP which often 'sound' like plastic.
If you want them a little warmer, shunt little Styroflex Caps like 1nF.
For me, the entry level Mundorf MKP is no good cap.
Peter "arrgh ... i was sure of the selection ... even if they are entry level
I will take out the present ones and measure the distance between the pins
on the pcb
Are also the cilindrical ok ?
Thanks a lot.
Kind regards,
bg
Edits: 07/16/14Follow Ups:
The axial/cylindrical ones are ok.
You could also try Kemet (Rifa/Evox) SMR or Siemens MKL, my prefered caps in low voltage applications. Look @ ebay (.de)
Peter
Hi and thanks again
I will go hunting for them. They are less common i see
I have found one vendor but i have to check if he ships to Norway where i am
Thanks a lot again.
Kind regards,
bg
The Bulgarian or Romania guys will ship to Norway.
For Kemet there is a supplier in Sveden.
Hi and thanks again.
I will try them. Siemens caps are quite famous.
I remember the mythical Sikorels ... now Epcos i think.
Kind regards,
bg
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: