|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
73.226.116.199
In Reply to: RE: RCA 12AX7 Long Black Plate - Noisy compared to Long Grey Plate? posted by Paul Kehayas on March 28, 2016 at 13:06:44
Are these tubes new - meaning not used yet?
I had a similar issue with a noisy tube in a position. The oddity was that with 20 plus hours of burn in the noise/hum disappeared. And it was a 12AX7 tube.
Can you put this tube in another position?
Can you try rolling in one at a time?
If the original tube is not shielded I doubt that is the problem.
post your findings.
charles
Follow Ups:
Tube is in the 3rd amp position - (There are only 3 12ax7s in the MX110 - the phono section for two of them and also this position) so to be honest the only other position to put that tube would be in one of the cathode follower positions (now have grey plates in there) of the MC240.
I have had this tube in the MX110 for the better part of a year with no issues - have checked each tube in the audio path in the 110 and it's this one that is the noisy one - tests really well on my Stark 9-66 (just calibrated) and it's kinda confusing about this...
I have put in another black plate in this position and it's fine.
Just really puzzling about it and another BP went howling about a year ago - that was during burn-in.
This isn't.
Paul
I have used quite a few BP RCA 12AX7. But these days, good ones are hard to find. I supposed that many being sold now are noisy, microphonic or something or other. I have had better luck with GP RCA 7025. You can still find high testing, low-noise ones
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: