|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
70.162.234.58
In Reply to: RE: If I may chime in... posted by Jonesy on March 23, 2016 at 08:05:21
There was a socket that was a little too open on the side I was have trouble with, tweaked it and cleaned with pipe cleaner dipped in De Oxit. All is well. I have to get into the habit of checking them. When one considers how much some of us spend on tubes and the archaic design of the contact socket I wonder... High end connectors for other applications usually have a stainless collar which acts as a spring to ensure the socket parameters stay the same.
Follow Ups:
...some old time transmitter grade sockets did indeed have "helper" springs around pin contacts to assure a tight grip at all times. Pic is closeup of contact of an old Johnson 7 pin ceramic socket intended for tubes like 829 or 6C33. Spring wraps around the outside of actual contact.
I'll order myself a socket and check if it feasible to make up something. I was thinking more along the lines of a key ring type of spring (easy to put on)- not too tight and not too soft, just right... I'm sure many have chased problems without thinking of this.
I try cleaning and tightening everything once a year. Including controls, cables, pretty much anthing that makes contact. Even wall outlets. Admittedly it takes a long time and I am getting lazier. Still haven't completed my latest annual clean which I started months ago.
Yes it would be nice if things could be more stable. Sometimes I feel like just soldering everything together and be done with it!!!!
Cheers!
Jonesy
"I know just enough to get into trouble. But not enough to get out of it."
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: