|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
50.72.198.229
In Reply to: RE: AR SP-9 tube question posted by vinylfind on March 07, 2015 at 06:50:58
You'll need to remove the bottom and inspect that side as well.
Also check the fuse.
Taking pictures and uploading may help us narrow down problem.
Hang in there!
Jonesy
"I know just enough to get into trouble. But not enough to get out of it."
Follow Ups:
I will check the underside and the fuse. I forgot all about the fuse. It would be wonderful if it was just a fuse replacement.
If you have to send it to a tech, have the coupling and output caps upgraded (I used Vcaps in my SP14) . The tubes in the SP9 are for the phono stage, if that is important to you use the best you can find (think Amperex, Telefunken, or Seimens). If you use it as a line stage only then use Sovtec. These preamps respond to a high end fuse (I didn't believe it until I heard it) and a better power cable.
Maybe your little problem will get you a better preamp.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: