|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
99.6.55.49
Who can calibrate/repair one of these and do a competent job? Bought my MU150 some time back and it's been a real pleasure to use. Have decided to hang onto it for the long haul and interested in getting it checked out and calibrated. All functions seem to work just fine, so hopefully it'll just need a tune up.
TIA
Follow Ups:
There is very little calibration on the MU140 and the MU150 which are essentially the same units..They are one of the best units for testing dual nine pin triodes as well as small power pentodes.
The unit is going to need to be recapped no doubt and I have recapped mine but you can probably do this yourself if you can solder.
"If it measures good and sounds bad, it is bad; if it measures bad and sounds good, you have measured the wrong thing."
- Daniel R. von Recklinghausen
Thanks, Michael, but I think I found somebody to do the job.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: