|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
192.200.224.203
In Reply to: RE: Thermistor? posted by Jonesy on June 28, 2014 at 16:39:16
Call ARC and get a replacement from them. Won't be more than a couple bucks and you will know you have the correct thermistor. One that is slightly different probably won't make any difference but I would err on the side of caution and use the exact value installed by the factory.
Follow Ups:
but said the 47 ohm I ordered is close enough and should work fine in my amp.
Will report back if it doesn't work out.
Thanks for the suggestion!
"I know just enough to get into trouble. But not enough to get out of it."
While I would not buy tubes, large electrolytic caps from ARC, too pricey, for most of this general stuff I find it easier to just get it from ARC. No need to track it down from Mouser, etc. For me time is money as well. These kind of parts may cost ARC 25 cents and you might pay $2 but you know you have the right thing and did not waste a lot of time tracking it down.
Edits: 07/01/14
I've received clarification from ARC, and need to run 2 pairs of parallel thermistors in series. I will be ordering the parts directly from ARC.
What great service to further follow up from my original request to them.
You are definitely correct is suggesting making contact with them.
Cheers!
Ed
"I know just enough to get into trouble. But not enough to get out of it."
I've ordered 1 but will give them a call. Their schematic and parts list just say Thermistor. Unusual as all the other parts have descriptions.
"I know just enough to get into trouble. But not enough to get out of it."
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: