|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
184.238.164.174
In Reply to: RE: You have it wrong.... posted by Nunki on April 14, 2014 at 09:22:19
PP amps do use small tubes in the input sections, but close matching is probably more critical in preamps and phono stages.
AB.
Follow Ups:
If a dual triode is used as a long-tailed pair phase splitter, matching is reasonably important, more for transconductance than noise or emission. Reason: A transconductance match will drive the output tubes differently (unless your amp has an AC balance control, in which case transconductance matching is not important). Emission matching isn't terribly important because the tube will be happy with any reasonable quiescent operating point. Noise isn't terribly important because at the phase splitter/driver you're dealing with the largest voltage signals before the output tubes, so the signal spends most of its time way above the tubes' noise floor.
Note that this discussion only applies to long-tailed pair splitter drivers.
Most that I've seen are single-ended, Class "A."
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: