|
Home
/ FAQ
/ News Classifieds / Events |
Audio Asylum Thread Printer |
Get a view of an entire thread on one page |
75.139.102.12
| '); } else { document.writeln(''); } } else { document.writeln(''); } } else { document.writeln(''); } } // End --> |
In Reply to: RE: EL34 comparisons posted by Michael Samra on June 30, 2009 at 13:23:12
Did you try Genelex reissue KT-77s? I have a set breaking in right now and I am real pleased with the sound, but I don't have your experience with vintage tubes to put the reissues in proper context.
Dave
Yes I have tried the Gene kt77s and the JJ kt77s...They both sound better than the el34 but I'm just not an EL34 fan..I am so hooked on the 6L6g and the 6L6gc black plates and the EL37s and the kt66s and the 6N3C-e and the 807s that I can't get used to the el34s for what I am looking for in a tube..The 6550/Kt88s are real nice if you get good ones like the TS or genelex or the SEDs but those 6L6g's,and that RCA black plates and the 6N3C-E spoil the hell out of you.
If the power supply waveform isn't pretty,neither is the sound in most cases.
I bought some JJ KT77 from Mike over a year ago and so far had no negative issues with them.
Recently I got some re-issued GL KT77. They now have about 100 hours on them and so I did a brief comparisson between both.
GL KT 77 have full and warm mids, less highs than the JJ
JJ KT77 are lean in comparsisson to the GL and have more highs
Well, at the moment I am using one JJ and one GL KT77 in each channel, since my amp runs in PP.
Sounds pretty good so far. Combines the fuller mids and extended highs.
Pardon my ignorance, but what's PP?
Is a GL/JJ combo something that might work in an ST-70?
Thanks
PP stands for Push Pull, in contrast to SET - Single ended triode.
The JJ/GL only works if you can adjust the bias individually for each tube, since they have different bias points (according to my biasing aid in my amp)
Capt
Thats about what I found exactly.Its hard to pick a winner because they both do different things well.
If the power supply waveform isn't pretty,neither is the sound in most cases.
Have you tried any 6l6 or other power tubes in your scott 240's?
I have a rebuilt pair and was told I could try some other power tubes and have never gotten around to it.
bkrop
I havent in the scotts because I would have to raise the neg bias voltage to run 6L6gcs..I have tried others in the leak SI-50 which takes EL34/kT66s/5881s and 6L6gcs of course and in the last three just stomp the EL34s into the dirt.
If the power supply waveform isn't pretty,neither is the sound in most cases.
Post a Followup: