|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
47.146.145.65
In Reply to: RE: Halo Transformer Schematic posted by Triode_Kingdom on January 03, 2017 at 17:53:35
Thanks for the schematic. Adding the filter cap makes the Output looks more SET friendly. It looks much like a DC with high ripple on both sides due to the Diac firing on both direction.
I don't see any square wave like in that scope trace so the ripple is all that is making that of the AC heated DHT?
Whatever the case, that output looks much more amp friendly than the square waves I have seen before.
I think you can reduce the ripple by a considerable amount if you put a larger uF cap behind the rectifiers.
.
.
.Thou shall not stand where I type for I carry a bottle of Certified Audiophile Air and a Pure Silver Whip.
Follow Ups:
It's a 66kHz (approximate) square wave modulated with 120Hz ripple. The square waves aren't visible in the trace above because the sweep speed is set to show the ripple. As for being SET friendly, most of the harmonic energy in the square wave is third and above. That puts it at 180kHz.
--------------------------
Buy Chinese. Bury freedom.
I also had a thought that the time domain wasn't stretched enough to show that square wave. But that waveform looks very clean to even suggest there is such underlying square wave. Anyhow, my worry with the square wave is the fundamental 66KHz. F3 wouldn't be a concern. There are plenty of other harmonics besides F3 with considerably amplitude but they are at much higher frequency so they may not be audible.
Without the additional filter cap, I guess the halogen transformer works fine without the additional 120Hz ripple.
What's the amplitude of the 120Hz ripple? And you said the hum pot eliminates that ripple hum?
.
.
.Thou shall not stand where I type for I carry a bottle of Certified Audiophile Air and a Pure Silver Whip.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: