|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
174.126.4.206
In Reply to: RE: Russian FT2 teflon caps proof you don't need the 600v rated ones. posted by Michael Samra on May 29, 2016 at 21:31:21
Mike: This is a totally different question ??? Will your Sencore LC 102 read the impedance of a output transformer ?? Thanks Will
Follow Ups:
Will
It will read choke values and it will ring yokes and even switchmode transformers to see if they are good but I don't think it will read impedance.
It is very easy to measure the primary impedance of an OPT trafo just using a variac and an AC voltmeter. I'll do a demonstration in pics explaining each step if you want.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
Edits: 05/30/16
Mike: Thanks for your quick answer.....I am familiar with that method, but I have about a hundred transformers to check and was looking for the easy way out......Thanks again Will
I've never known any other method other than calculating the turns ratio and doing the math.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: