|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
141.239.172.61
In Reply to: RE: I think i found the problem posted by Triode_Kingdom on April 19, 2016 at 11:04:06
Do you think I should change out the caps in the bias supply? I have found them based on the residual voltage on the metal body. They are some fotoflash type by Elna? You know the ones that they use in the cheap cameras. I know those are not so reliable. regards, Dak
Follow Ups:
Dak
Take out the signal tubes and measure the negative bias again.I mean take out the 12AT7 and the 2A3 and measure the negative bias.I almost sure it's one of the Jensen caps leaking and like TK says,you have to measure DC leakage with the cap lifted on the side going into the grid of the 2A3 and or 845.Photoflash caps can be questionable because they can have a short lifespan and higher leakage if run near their rated voltage.
A friend you get for nothing,an enemy has to be bought
Before I took new readings. The bias voltage is still unstable. I will try without the at7 and 2a3 and see what happens. If no difference I think I will change out the 3 caps in the bias supply. thank you for the tips. Dak
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: