|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
162.224.170.76
In Reply to: RE: Ripple current of motor run caps? posted by andy evans on February 03, 2016 at 16:29:27
Motor run type caps are usually rated 20+ amp range. These days I think it is better to call them "oil filled metalized polypropylene" caps. Used to be we were talking about AC rated caps used with motors. Today we can get caps intended for use in UPS, VFD, etc. that are DC rated and intended for your exact usage.
Follow Ups:
The plastic-cased ones are not oil-filled, that is why they are smaller in size. They will handle the high-ripple high-current no problem as well.
I have tried them in your exact usage, and found they sound less good than oil-filled motor-runs (big metal oval cans).
Joris
I was referring to the typical plastic encased metallised polypropylene caps, which I assumed were not oil filled like the older metal jacket ones.
They are also rated for high ripple? They're usually marked 450vAC
Your link was for a standard aluminum electrolytic cap. Motor run caps are a non-polar film cap. Very different items (IMHO).
For a power supply in an amp I'd look at the ASC X386S for a nice sounding, affordable, current production, cap. ASC also offer caps intended for DC power supply filtering but I have no experience with them. It might be worth contacting them as these days more and more motor run caps are clearly labeled as "only for 50-60 hertz operation".
I can say "once upon at time" the GE brand 440VAC motor run caps also had a 1,000 VDC rating.
On your side of the pond it may make more sense to look to Epcos/Siemens/Sikorel.
Andy
The larger caps rated in AC voltages of 370vac or higher are usually used in motorrun applications which are higher current.So obviously the 440vac caps are as well..They can be dry as well..I only mentioned the oil caps because that's what so many use being you can get then so cheap.
Nobody ever went broke underestimating the intelligence of the American public
H. L. Mencken
Motor run type caps are usually rated 20+ amp range. These days I think it is better to call them "oil filled metalized polypropylene" caps. Used to be we were talking about AC rated caps used with motors. Today we can get caps intended for use in UPS, VFD, etc. that are DC rated and intended for your exact usage.
Agreed..This is why they are so frequently used in high current application and even 440v 3 phase circuits running huge compressors.
Nobody ever went broke underestimating the intelligence of the American public
H. L. Mencken
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: