|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
58.165.233.158
In Reply to: RE: At least they are honest posted by Russ57 on August 27, 2015 at 15:50:51
I am hoping Keysight can provide some additional info so I know exactly what it can read and how accurately.
Their brochure states measurement from 0.1mV to 1000V. Their datasheet then introduces the 5 - 100% condition, which appears not to be clear going by the comments to this thread.
What I would expect is that it can read from 0.1mV to 1000mV (when ranged to mV), but its guaranteed accuracy is only applicable between 5% to 100% of that range. But, what I am seeing is that it may only read from 5%, which is misleading, whether intentional or not.
Otherwise, it seems like a nice (even extravagant) meter to have the kit for basic DIY.
Regards,
91.
"Confusion of goals and perfection of means seems to characterise our age." Albert Einstein
Follow Ups:
I think it just means that the "True RMS" reading is only valid in that range. (5% to 100% of the range selected)Your meter is accurate to 1% of 0.1mV (0.001mV)
However the last digit is accurate to 5 counts, so 0.001mV might actually read 0.005mV due to a resolution limit in the analog to digital converter for the display.That is probably why the true RMS readings are off a little bit when measuring under 50mV.
Hope that clears things up.
Infamous sockpuppet
Edits: 08/28/15
Yes, that is what I am hoping for.
"Confusion of goals and perfection of means seems to characterise our age." Albert Einstein
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: