|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
72.52.96.59
In Reply to: RE: Thanks for the reply Gusser posted by 1973shovel on March 12, 2015 at 02:55:54
Yes, swapping out legacy chokes with low DCR parts can certainly make sonic improvements. As you will be pushing the B+ up a significant amount, most amps will sound better when operating at higher B+.
But the rub is you are now possibly stressing tubes and other components. And especially the 50 year old components that can be fragile.
My advice is to measure the B+ and make sure you aren't stressing anything with your new low DCR chokes.
Follow Ups:
Which was my point.
So I should be able to get the same sonic benefit by increasing B+ and leaving the choke alone.
I would say yes. Because replacing say a 2h 50ohm DCR choke with a 0.35uh 5 ohm choke would elevate the B+. However you have now lost a significant amount of ripple filtering with the millihenry sized choke.
So if more B+ is your goal, reducing the choke DCR is only a good option if you can maintain the same or close henry value.
And again I must stress that bumping up the B+ to get a more dynamic or aggressive sounding amp is not a good practice. Most commercial amps were designed at the optimum operating points. Some even beyond that such as Dynaco because tubes were cheap in those days. And remember that line voltage in the 1950/60s was 110-115v. Today we have 120-125v.
You really need to carefully analyse the circuit before raising the B+.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: