|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
24.21.214.83
In Reply to: RE: Yes, most don't need a preamp posted by Chip647 on January 26, 2015 at 17:01:06
Yeah, but don't forget the impedance matching function of a preamp. If you are not starting with a pretty low impedance source (like a DAC) you can really be wasting a lot of money on a passive control. 10:1.
Follow Ups:
The only thing that does not have a low impedance output is a tube preamp that has a simple plate output. Might be doing better to fit a volume control on that beast and/or an output impedance transformer. The problems that a preamp can solve are mighty rare. It will be a lot better to fix the rare case of a high impedance tube phono preamp.
There are plenty of solid state output stages that have output impedances of a few thousand ohms.
"There are plenty of solid state output stages that have output impedances of a few thousand ohms."
Such stuff is (IMO) very questionable. I strongly believe in accommodating the "lowest common denominator", which is the IHF 10,000 Ω I/P impedance "standard". Therefore, line level O/P impedance must be <= 1,000 Ω.
Eli D.
But still, 2K into a 10K load driving a foot or two of decent cable dissolves into an academic discussion in the faculty lounge.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: