|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
71.30.109.223
In Reply to: RE: here is one posted by thermionic addictions on November 19, 2014 at 11:20:25
Interesting. Not sure if I have any 5965s though. I will have to check.
Thannks
Follow Ups:
Poindexter used 6GK5 as driver in later versions of this amp. He thought it was mo' better.
His website seems to be gone but if you google "musical machine" you should be able to find details. I can also probably dig it up in my files if needed.
The dude was a real asset to the Asylum.
.
Freak out...Far out...In out....
Thanks, I will see if I can find it.
Less than 20 bucks will get you 5 of them.
The 5965 and the 5965a are military grade tubes, more expensive.
But the 12AV7 will give you an idea if this is the amp you are
looking for.
Plus, you will get to hone your skills at designing and
building negative power supplies, this is the amp that
I learned those skills on.
Cal
I am going to try a triode mode 6v6 with a 6swl7 driver first and see how that goes because I have all the parts for it. May send off for some 5965s while I am doing that.
Thanks
edcor iron is cheaper. sometimes better.
~ $60 shipped ish for 15w PP iron.
I've used it, not bad at all.
I'd probably buy Dynaco ST35 iron if I was going to build a nice 6v6 or EL84 varient PP amp. I'd run em in UL mode too.
I will probably try them one of these days as money and time allows.
You'll need push-pull OPTs, so 5965s aren't the only thing you don't have on hand.
Dave
The 125e is a push pull opt.
My apologies, I read "se". With a low frequency rolloff at 150hz, it's pretty limited, good luck.
Dave
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: