|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
70.117.113.124
In Reply to: RE: KBG-MN VS. K75-10 posted by Tubenstein on September 18, 2014 at 21:05:51
I've used both on my bread boarded parafeed line stage, as parafeed caps, so they are directly in the signal path like couplers. They are both some of the best caps I've tried. After a LOT of cap rolling, I settled on the KBG-MNs, later I tried the K75-10s. The K75-10s had really great mids, but left a little to be desired in the high end. Then I bypassed with a Russian SSG silver and mica, that did it. Usually not a big fan of bypassing directly in the signal path, but this combo really worked. That combo is still in there.
Soon I'll try bypassing with a smaller SSG to see if I can get the same highs, and possibly reduce any tendency for smearing. Right now I have a 2.2uf K75-10 bypassed with a .1uf SSG (what I had on hand in my parts stash). I plan on trying bypassing the K75-10 with a .022uf SSG and see how that sounds. I've seen posts from an inmate (forget who) that claims the 100 to 1 ratio of bypassing a K75-10 with a SSG was the way to go, so want to give it a try, but what I have now is PDG.
twystd
Follow Ups:
Going to try the K75's in my line stage, with the SSG's for bypass.
jeff
Keep us posted on the test results...
I have 0.1uF FT-3 teflons in my amp at the moment, but have been thinking about trying the SSG again or maybe something else...
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: