|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
173.76.115.140
In Reply to: RE: Not really looking to deal with posted by Eli Duttman on August 15, 2014 at 20:11:32
I built a push-pull 6V6 ultralinear amp with used Dynaco Z-565 outputs and a single, current-sourced, long-tail differential 6SL7 driver. I used some 0.22uF Facon paper-in-oil coupling capacitors.
There's barely enough excess gain to provide any negative feedback. The amplifier has a nice midrange but sounds pretty shut-in. I might try changing to poly coupling caps to see if it opens up a bit. The amp makes about 11 Watts per channel.
This was a junkbox project and I've never tried to optimize it. It was supposed to be a loose adaptation of Poindexter's "Musical Machine."
IMHO, not really a success. Listenable, but not extraordinary. I know, not what you were looking for, but sometimes it's good to have a data point, even if it's not a positive one.
I think adding another stage of gain would lower the distortion and give a more incisive sound. If you're going to run almost pure open-loop, you probably want a very linear output stage. And a more robust driver tube.
LOL.
-Henry
Follow Ups:
Henry, that's a very clean layout. A shame to see it sitting idle just because the first rendition didn't wake up. Have you made basic measurements like frequency response and the like? Much as I like octals, I believe 6BQ5s produce better dynamics than 6V6 in PP designs. Can't prove that, it's just my gut feel after years of hearing both.
--------------------------
Buy Chinese. Bury freedom.
Thanks. The amps haven't gone to waste. I sold them to my friend, Bryan who was using them in his system which is notably more high-end than mine. About a year ago I brought my new solid-state amplifier over to his house and it sounded so much better I took pity on him and gave it to him on semi-permanent loan. I use the tube amps to watch movies on my TV.
The amps aren't horrible, they just don't have that "sparkle" or "see-through transparency" of the solid-state amp.
-Henry
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: