|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
110.33.169.202
In Reply to: RE: What is your current draw? posted by Thomas Mayer on July 21, 2014 at 06:50:34
Thanks Thomas.
the reason I thinking of using two rectifiers in paralell is to lower they impedance therefore lower impedance of the PSU
LT
Follow Ups:
Hi!
How much the impedance matters also heavily depends on the actual preamp circuit itself and also on the PSU scheme: full wave CT, full wave bridge, choke input cap input, etc. In my experience you won't gain a lot by doubling the rectifiers if anything at all. Over the years I went the other way and I got tremendously good sound results with high impedance power supplies others would laugh at.
Some of the TV dampers listed have very low impedances. There or others even lower, for example 6CG3, 6CJ3 are approaching the numbers of MV tubes.
If the impedance of the rectifier worries you, use solid state diodes,or a regulated PSU
Best regards
Thomas
"Over the years I went the other way and I got tremendously good sound results with high impedance power supplies others would laugh at."
Maybe some others, but by no means all would laugh; not everyone on these forums is of the "Low PSU Impedance" persuasion. These things need to be seen in perspective. A low current preamp, whatever Mu its tube(s) may have, is not going to give one iota of improved fidelity by feeding it from an "industrial strength" power supply.
I've even found slight improvement when going from an EZ81 to an EZ80 in one low-current preamp's PSU. It seems to be a matter of "horses for courses" IME.
The quality of tube itself compared to its peers more often makes way more difference IME.
In this instance, Mullard D Getter 50's EZ81 sound glorious (regardless of internal resistance) but Mullard may suck in another tube variety.
Naz
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: