|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
71.36.119.64
In Reply to: RE: Utah Coaxials posted by walkstoslow on January 30, 2017 at 18:19:15
I have one of those 8" "Pandore" units, blue cast frame. Go ahead
and take the cover off the back and see if cap is there. If not, it would be near the tweeter unit in front or on input terminal, or attached to the frame behind cone. You can leave the covers off, great idea IMO.I'll look at mine Tues. and see if it has a cap. I have no specs. or
enclosure ideas for you.
Edits: 01/30/17 01/30/17Follow Ups:
Coner, thanks for the info, I am considering the "Dayton Woofer Tester", to come up with the specs, does anyone have an opinion of this device?
I have heard pros and cons.
thanks again!
It works great, and also very accurate at measuring caps, coils and
resistors. I'll see if I can get specs on the Utah, it's not
actually mine, but have access to it.
thanks for the info about the woofer tester,
now i need to save a $99.
Used, orig. cone.
FS 76.6
qts 7.13
qes 19.14
qms 11.375
spl 78.8
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: