|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
99.54.92.250
Have looked online but not been able to find schematics for the Marantz HD-88 speaker crossovers. If anyone has these, they would be most appreciated. Also, does anyone know the values of the variable resistors used to adjust levels of the tweeters and midrange? I've cleaned mine of corrosion but they were badly damaged and remain too fiddly -- they have to go.
Thanks!
Bob Carr
Follow Ups:
If the controls are L-pads (not a standard pot), those are easily
obtained from Parts Express. The back of control should be printed
with the ohms value. They come in 4, 8, and 16 ohms. L-pads use
a ground wire to one of the terminals, a regular pot will not.
Edits: 09/17/16
Thank you, Coner. There are just two connectors on the "pots." The pots appear to read 3 Ohm, 5 Ohm and 10 Ohm. I read the L, M, N as just being sequential indicators of some sort.
I don't see anything similar on Parts Express so perhaps I'm reading these wrong or there's a missing zero or something. I've attached a couple pictures. Your thoughts are much appreciated!
Bob Carr
Great pic and info, thanks!. Looks like regular pots there, the
old AR speakers did the same thing.
I might be tempted to still use L-pads, but use them as pots, just use
one side of it? (no ground). Use 4 ohm pads for the 3 and 5 ohm, and
use an 8 ohm to replace the 10. All 15 watt pads.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: