![]() |
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
24.177.85.247
| '); } else { document.writeln(''); } } else { document.writeln(''); } } else { document.writeln(''); } } // End --> |
In Reply to: RE: Why is sensitivity measured at 1000Hz? posted by Craiger56 on July 22, 2012 at 09:22:30
If you are measuring a multi-way system (2 or more bands/drivers), 1KHz is a good midband point to assess overall sensitivity and, if constructed properly, the sensitivities of the rest of the range will be commensurate.
Follow Ups:
Agreed.
And one further point - human hearing is most sensitive in the midband range of frequencies (typically around 1 -3 khz). At frequency extremes, human hearing capability is not very consistent. So focusing on a frequency of 1khz for example makes physical sense - particularly in the context of a finished speaker because as you suggest, if it's properly constructed, it should have similar sensitivity at all other frequencies. When talking about a subwoofer or woofer, a 1khz sensitivity rating makes little sense. And as others have suggested, some of the better manufacturers have for years listed an average sensitivity rating over a specified frequency range of interest - particular ly driver manufacturers.
compared to 1 kHz.
See link
And that makes 1Khz a better compromise for a wide-range speaker, rather than a public address speaker.
Post a Followup:
| FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
||||||||||||||
This post is made possible by the generous support of people like you and our sponsors: