|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
97.105.99.138
In Reply to: RE: When you get "Serious" about building SE amplifiers you get ones of these posted by used-hifi on February 09, 2017 at 19:30:45
The Genrad LCR Digibridge is much higher quality. More expensive, yes, but not made in China. At $200-300, the used Genrads are a "serious" bargain.
--------------------------
Buy Chinese. Bury freedom.
Follow Ups:
Hi TK my particular model was compared directly to the very expensive agilent units the difference was .115%!
Hell they use the same Autobalancing Bridge principle just like good expensive ones :)
and for you guys needing to use an inexpensive tool to measure primary IMP this will do it!!! it will also measure the shunt capacity across choke reactor.
Lawrence
"Hi TK my particular model was compared directly to the very expensive agilent units the difference was .115%!"
Getting an analog circuit to hit a specification is rather easy. Keeping it there in light of environmental as well as component aging is a totally different matter.
That's what you buy with HP, Tektronix, and other established test equipment manufactures.
yeah you go ahead by them dinosaurs of test equipment and keep paying to have then calibrated every other year...
Mine just hit a button and it calibrates itself!!
plus its NEW not some 20 year old machine that takes 20 mins to stabilize before you can even use it. you guys are missing the point its as good as the expensive stuff and if it dies in 5 years they will have an even better unit i can buy just as inexpensive and be good for however long.
really you have to look at the bigger picture plus if there was a competing USA company that made a similar product/similar price I would be all over it but we dont and so my money goes much farther in this hobby
you guys have fun
Lawrence
Against what? How stable is the calibration reference?Hint, why did Dynaco choose 1.56 volts for the bias setting in their famous amps. That required a non standard cathode resistor. Why 1.56 volts?
It's all about the accuracy of the reference. Otherwise any so called calibration is relative.
Also, you only need to calibrate those old dinosaurs once a year if you are doing work that requires traceable calibration certificates. That doesn't mean they need yearly calibration to remain accurate - and surly accurate enough for hobbyist audio use.
Edits: 02/10/17 02/10/17
~!
The Mind has No Firewall~ U.S. Army War College.
Alkaline batteries did not commercially exist back then.
dave
Am aware Dave... merely implying that alkaline tend to run higher voltages... in my experience.
The Mind has No Firewall~ U.S. Army War College.
Even this well-considered argument is captive to the necessity of the unit remaining functional. Chinese products carry an inherent risk of default in that regard. :)
--------------------------
Buy Chinese. Bury freedom.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: