|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
67.233.208.31
In Reply to: RE: PS caps posted by Paul Joppa on December 11, 2014 at 18:07:17
Panasonic DC Link at Mouser
100uf 500v 4 pin $21
Ten for $200. That's half the price of the WIMAs. Not too shabby.
Do all 4 pins have to be connected?
Big speakers and little amps blew my mind!
Follow Ups:
Here are some Scotch caps for ya.
Russian electrolytic 100uf 350v caps. 10 for $15.
Are the connectors a pain?
Big speakers and little amps blew my mind!
Just build an isolated bracket for mounting unless you use your chassis as ground which is an art to itself..it would be cool to hear them...
Stuben
Good point.
If the connectors work in your application they are fine. I would try and find out when they were made though as they are electrolytic.
Although if you are trying to achieve a specific grounding scheme, these may limit you as they will be grounded to the chassis at their particular locations.
Aside from that, what's not to like, simple and easy installation and only one wire to connect.
The safest suggestion I have already made, was to use WIMAs, as they HAVE been sonically evaluated and determined to be superb !!
Cheaper DC LINK stuff, have NOT yet been sonically evaluated, and so, those cheaper ones may be more expensive !! :-)
I use the higher VDC rated caps, 800 or 900 VDC as I recall, and use in the C1 position ... it is fine !!
Jeff Medwin
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: