|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
82.39.104.89
In Reply to: RE: Maxing Out my 2A3 amp's Power Transformer posted by drlowmu on November 26, 2014 at 06:58:40
I can understand bypassing the thermistor . I use a delay timer to bypass the thermistor in my hybrid amp . A simple test is to measure the AC across these things under load usually shows slight volt-drop . The rest of what you are doing seems pointless . The fuse bypass is downright dangerous !!!! I have plenty of huge transformers and chokes that will probably put what you have used to shame (ever seen a 3H 1A choke ?) but I rarely use the large items apart from in breadboards . I currently run 100VA 300V 45 ohm transformers for HT with 2A3 monos which are more than adequate and run cool in operation . Wire I use is 1/0.6 for small signal (23AWG) , 19/0.2 for HT and heaters (20AWG) , 19/0.25 (18AWG) for filaments/mains wiring and 19/0.3 (16AWG) for the output transformer secondary (all silver plated copper/PTFE) . I hold stocks of silver plated copper/PTFE all the way down from 26AWG (1/0.1) to 10AWG (37/0.4) but don't feel the need to use anything this thick inside a valve amp
Al
Follow Ups:
Hi Al,Nice post and explanation. Use what you want. I am not here to dictate what you must use !! I have A-Bed almost all of what I write about, so I have tried all I discuss. I am most happy using wire, similar to yours, but lower in AWG. YMMV, fine !! One size does not fit all.
Regarding chokes, a large size and weight I do not seek. Recall, I want low stored energy, so my choke of choice will weigh 2 pounds or less, easy to fit below deck, and I prefer 10 Ohms or less DCR.
As long as we are HAPPY in our hobby, that is what counts in the end to my way of thinking. Hi to Andy. Cheers.
Jeff Medwin
Edits: 11/26/14 11/26/14
wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat - wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat wash - rinse - repeat - wash - rinse repeat
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: