![]() ![]() |
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
68.158.5.154
In Reply to: Re: Hum/Buzz posted by oldroadie on February 1, 2005 at 19:12:57:
Thanks for helping out guys! I really appreciate it!The pin 1 problem ain't it. First off, I'm using Jensen Isolators which have a switch to eliminate the Pin 1 problem, and I've tried consumer amps with unbalanced inputs... they all exhibit the same buzz.
I did not know to check the earth ground. How is that checked? I know there's at least one metal rod jammed into the ground that has the tele, cable tv, and electrical service grounds attached to it. Is there a way to check it for resistance or potential?
The dimmers were removed. The buzz is still there. If I get rid of the buzz, I'll retry the dimmers and see what happens. But right now, they are physically disconnected and the buzz still exists.
Follow Ups:
Here's a link to a real good discussion of your issue.Pro Sound Web is a pretty good resource for any of this type of info.
I'm afraid my basic skills have taken you about as far as I dare go.
I don't like to play with AC too much, folks can get killed for bad advice.Good luck
Tom
- http://srforums.prosoundweb.com/index.php/m/31420/2407/?SQ=5bb4d0e1f9346d189fc7acd8eac85a47#msg_31420 (Open in New Window)
![]()
I got a neat idea on what in going on .
As my answer is somehow long, and involves drawings, I posted it at: