Pro Audio Asylum

• Re: Soundcraft mixing board problem - Kadin2048 18:26:22 02/20/05 (0)
  In Reply to: Soundcraft mixing board problem posted by dynacohum on November 17, 2004 at 02:48:22:

  I have a Soundcraft 200SR that I use almost daily ... I can go through the pins with a DMM and get the pinout for you, if you still need it. Mine uses a round connector with screw-on locking ring between the console itself and the outboard power supply.

  Let me know if you need them.
  
  

  ---
• Re: Soundcraft mixing board problem - STUART 07:14:13 11/17/04 (1)
  In Reply to: Soundcraft mixing board problem posted by dynacohum on November 17, 2004 at 02:48:22:

  Go to this site
  You can download the entire manual for this unit in PDF format
  This manual includes schematics
  I suggest you download it and print it out for your reference

  :)

  http://www.soundcraft.com/product_sheet.asp?product_id=68
  
  

  ---

  • Re: no schematic - Centauri 14:46:20 11/17/04 (0)
    In Reply to: Re: Soundcraft mixing board problem posted by STUART on November 17, 2004 at 07:14:13:

    Unfortunately, you won't find the schematics in these documents. Whilst the original printed manual contained them, Souncraft have removed them from the pdf versions. In any case, the original schematics did not show the actual pin configuration for the connector cable assy.

    My 200B is buried in a case in a shed, but will be brought out next week for a show where the main desk is too large to use. If you still need info then, I can find out the connections.

    Cheers
    Graeme
    
    

    ---
• Re: Soundcraft mixing board problem - STUART 06:59:52 11/17/04 (0)
  In Reply to: Soundcraft mixing board problem posted by dynacohum on November 17, 2004 at 02:48:22:

  Sounds like an external power supply

  I think you need to find one for it
  
  
  

  ---
• Re: Soundcraft mixing board problem - Centauri 04:57:00 11/17/04 (0)
  In Reply to: Soundcraft mixing board problem posted by dynacohum on November 17, 2004 at 02:48:22:

  Good old desk..

  Power supply supplies +17V, -17V at around at 1.5A (using LM317K/LM337K regulators) and +48V at maybe 100mA (using discrete regulator). Unfortunately, I'm not sure of the connector pin assignment at the moment, but can find out the next time I get my desk out.

  Cheers
  Graeme
  
  

  ---

This post is made possible by the generous support of people like you and our sponsors:

Schiit Audio

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---