|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
76.232.89.255
In Reply to: RE: PA backwash posted by smcdonie@uwsp.edu on September 30, 2008 at 09:01:47
I am well aware of Audix. I have an Audix deal. The point remains that I have spoken off line with the original poster, and it has nothing to do with microphones. There is not a feedback problem. So, you no longer need to pimp Audix.
You assume that anyone that uses a Beta87 will have issues. I assert that only the wrong PERSONS using a Beta87 will have issues. This is equally true of Audix in the wrong hands.
Follow Ups:
If it was a cabinet resonance issue it would show up outside as well
She has no issue outside..NO room boundries
She has feedback issues inside and I would say your dead wrong
:)
Im not a spring chicken at this stuff
I have been doing pro audio for 25 years
Im not pimping Audix..I was merely point out that the Audix mics were
available at the show where the 87's were being used
We swapped out the 87's and there was no feedback issues
They suck..and are over rated and over priced
She is not noticing AS MUCH outside is what she told me. Of course she is noticing it more inside. She is playing small rooms, is close proximity to the walls, ceiling, etc. She can only notices it when she plays certain notes, AND IT IS ALWAYS THE SAME NOTES/FREQUENCY. How often do you have acoustic feedback or electronic feeback at the same note/frequency NO MATTER THE VENUE?
Besides that is an 8" loudspeaker in a tiny cabinet
I highly doubt there is even enough cone excursion to cause
that tiny little cabinet to resonate as your describing
She simply is having forward oscillation issues
:)
Cone excursion has nothing to do with it. Where do you get this stuff? You are saying a cabinet's resonate frequency is dictated by the limits of cone travel in and out? Whatever. Have you ever listened to a plastic speaker?
Dood
It aint the cabinets
She is playing an acoustic guitar and has gain issues
and she is using that freakin shure 87 mic to boot
You call her back and tell her to shut down the guitar and just
have the vocal mic on
Ask her if she has the problem
If not...then its the guitars/pickups and or mic she is using
for them
I have no idea what she is using with those acoustics
Yes I have heard the plastic cabs
And one other point here
If she is not using a pickup on that guitar and is sticking
the hole of the guitar up to a mic then there is a real chance
thats where her problem lies
Depends on the mic
Depends on the pickup on that acoustic guitar
Thats a real possibilty is the pickup on that acoustic and how
its installed
Some of those things can cause exactly what she is describing
Im saying its not cabinet resonance
Thats what im saying......
Your saying its the cabinet resonance...im saying its not
So I guess we disagree on that point
:)
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: