|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
173.200.6.182
In Reply to: RE: PS/2 Mice & other recent interesting HW comments... posted by GStew on November 20, 2011 at 19:59:29
Not the one Mr. Wong mentioned though.
The one's I tried I could not get JULI@ to install. Something would be weird so I put the MB back in the box and back to NEWEGG. Tried three fo them.
Under-volting the SSD? That just makes no sense to me at all. Certainly would not want to give it any more than the median 5 volts but I think I refuse to believe that could make a sonic difference. I do love being proved wrong, though!
I hope that board Mr. Wong has tried will work 'cause I do not know what to do with that processor!!! Thinking about getting one as an excuse to do find the minimal nLite install that will allow AWE.
You need to do another picture of the JULI@ board with some explanation of what is what. That is more stuff attached to JULI@ than I would have thought possible!
Follow Ups:
and there was no degrade in SQ when compared to USB.
Note that this board has Rev. 1.2 and 1.3. The 1.3 version has one choke and some components removed around the CPU, don't buy.
My suggestion for selecting a MB, apart from other requirements, is to look at the CPU power circuit. 6 or more chokes around the CPU is preferred.
Thank you, Jack! Good news.
Serge.
http://cmp2-mihaylov.narod.ru/
My cMP2: Windows XP SP2 Ru, Gigabyte GA-H55M-UD2H, Intel Core i3-530, Corsair CM3X160C9DHX 1GB, system drive - Transcend IDE FLASH MODULE TS2GDOM40V-S, ESI Juli@, full linear PSU, NAS - WD My Book Liv
Agree, very good news.
Also interested in what you find with the 2nd-hand board.
Just to be clear, do the H61M-S2H have native PCI via the chipset or a bridge?
TIA!
Greg in Mississippi
Everything matters!
Collected a 2nd hand H55M-USB3 in the evening. Couldn't wait to listen to it. I also borrowed an unmodified H55M-UD2H from a friend for comparison.
An Antec Earth Watt ATX PS, i3/530, SSD and USB DAC were used. First of all, listened to unmodified UD2H MB to get an idea how it would sound with stand ATX PS. Bios setting was optimized. Without a linear PS and MB modifications, UD2H was a bit dull and boring, things were hidden a bit in the background. Background noise was a bit high.
Bios setting for the USB3 was similar to UD2H, but since I'm not familiar with this MB I set the CPU and Graphic voltage 0.03V higher. When the USB3 fired up, things were a bit different. I must say that with the same PS, this MB has better rejection to poor quality of switching PS, probably due better power circuit. Everything is just better and it was more enjoyable listening to it than the UD2H MB. After a brief comparison, my initial impression was that the USB3 MB was better sounding than the UD2H MB. The major difference between the two MB seems like a better PS was used on the USB3.
H61M-S2H don't have native PCI.
Serge.
http://cmp2-mihaylov.narod.ru/
My cMP2: Windows XP SP2 Ru, Gigabyte GA-H55M-UD2H, Intel Core i3-530, Corsair CM3X160C9DHX 1GB, system drive - Transcend IDE FLASH MODULE TS2GDOM40V-S, ESI Juli@, full linear PSU, NAS - WD My Book Liv
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: