|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
77.186.164.173
In Reply to: RE: Cmp2 lynx users (allocator too) with new 32mm HELP! posted by Dawnrazor on February 26, 2011 at 16:37:58
hey dawnrazor,
all though not a complete answer to your trouble, Iīve experienced the same strange "found new hardware" thing. at every boot the bloody thing wonīt shut up !
I also experienced that the windows installer had to be manually started from "services" and did not stay in "started" mode.....
I did a new "windows installer" and the trouble went away.
http://www.microsoft.com/downloads/en/details.aspx?familyid=889482fc-5f56-4a38-b838-de776fd4138c&displaylang=en
I think it can very well be that some of the recommended voltage and clock settings on the 32nM technology has a slight problem with a power hungry PCI device like the TWO-B.
-do remember that the sound improvement by lowering these settings decreases in expotential fashion, i.e. the first few steps downwards do have the lions share of the improvement. the further steps down in voltage and clock youīre in for diminishing returns.
itīs more important that the system is stable at slightly higher settings than forcing it down to the 900MHz it can do with the JULI@ card.
one little hint : when I did the BIOS straight to the recommendations, I forgot one section and harvested a bluescreen crash.
all settings done in one go, and everything was fine.
I have let the SMBus untouched. I have a strange feeling that exactly this device caused trouble & crashes with my previous PSU....(itīs a guess).
I installed all the drivers from the Gigabyte CD-Rom except the obvious Video & Network ones.
hope it helps a little and that you succeed soon !
cMP2 Computer (XP minlogon) i3-540 Core cPlay039 >Allocator> Lynx Aurora 8 FireWire /192kHz throughout. 2x AcousticReality Ref. 202 & 2x AcousticReality Ref. 601īs ICEpower. Magnepan MG3.3R beechwood frames & custom stands. Miller chokes
Follow Ups:
Hi Leif,
Thanks for chiming in. I tried the link and maybe I am doing something wrong but it didnt fix the issue. Well it DID take longer to announce that it found new software.
Perhaps I dont get how psus work but isnt the undervoltage just for the cpu and memory...that shouldnt affect the psu right?? Or the soundcard??
When you say you installed the stuff on the mobo disk do they show up in the control panel under add and remove software??
i recall mine doing that but I uninstalled them all. Are you saying yours are there??
THANKS, I know this blows and you would rather be with your new Aurora!
No one here remembers the bending of our minds
I have the L22 everything should be as per cics recommendations, do CPU and graphics last. CPU I was not able to go quite as low,75 I believe. Definitely do graphics last. Just changing over to internal SSD, Paragon Migrate OS was simple to use. T.I should add for my system, lots of cold starts.
No worries!
Edits: 02/27/11
Can you use the lynx mixer while running cplay at 192k with src set to 145db??
Weird that I dont get cold starts and I dont think I ever did with the new hardware though the psu is different from last time.
Just checked and I was at .8v for the cpu...just reset to .75, and it worked fine.
Thanks t.
No one here remembers the bending of our minds
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: