|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
174.108.54.6
In Reply to: RE: cMP - the open source high-end Memory Player posted by cics on December 30, 2007 at 05:42:01
I have cleared the CMOS values and still get the same error. I thought I could stumble my way through this but I can't even get started.
Does anyone have a suggestion?
TIA!
Julien
"There's someone in my head, but it's not me"
Follow Ups:
I could tell that it reset because the LEDs on the board light for a couple of seconds. The machine still wont post. It tares the "Delete" command to go to the BIOS, any key press after that brings up a blank screen with a cursor. The keyboard is useless after that.
Do I need a RMA?
Julien
"There's someone in my head, but it's not me"
I found, when I was having the problem due to the IDE/AHCI confusion that after resetting the BIOS (I,too, removed the battery when nothing else seemed to work) and when I started it up I got the BIOS reset screen, not the one you get when you hit DELETE.
This screen came up before I even had a chance to ask for the main screen. It then asked me if I wanted to go to "last good setting" or something like that or "default" which is what I asked for.
Try it again and see if you get this.
Go ahead and ask for an RMA since they only give you so much time to do so. I had asked for one when I was having trouble but never sent it back since it started working.
Try it again, first, before sending it back.
Rick McInnis
when you reset the BIOS?
I just wanted to be sure. Is that what the power cord mention is about?
I'm going back and forth with Gigabyte TechSupport trying to figure out what is going on.
Julien
"There's someone in my head, but it's not me"
before you can't.
That does sound strange!
Sorry you are having so much trouble.
On the previous board, I went through THREE before getting one that worked so, I know, it does happen.
Bye,
Rick McInnis
nt
Julien
"There's someone in my head, but it's not me"
Hope the new one works for you.
In addition to ryeland's suggestion I pull my mains plug at the iec end for several minutes and that seems to work for me (if you use any mains power that is).
Does anyone have a suggestion?
If you have already done so, apologies for wasting your time but try removing the MoBo's battery, leaving it out for 10 minutes and then replacing it. (It's worked for me more than once. No, I don't know why . . . )
HTH
I have no idea what is going on! I can access the 1st page in BIOS set-up then it is like my keyboard locks up. then the screen times out and a blank screen with a cursor comes up.
HELP!
Julien
"There's someone in my head, but it's not me"
Remove CMOS battery for 1 hour!
Gene.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: