|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
85.19.92.6
In Reply to: RE: Intona USB 2.0 Hi-Speed Isolator _ does it re-clock ? posted by Ryelands on April 18, 2016 at 02:49:35
Hi !
thank you very much for your kind and very valuable reply.
Regarding the " ADuM4160 is USB1 only " does this mean reduced speed ?
i am not at all in high-rez ... at max 16/48.
I found the following on the ADuM4160 datasheet ..." Low and full speed data rate: 1.5 Mbps and 12 Mbps "
and actuall i see a jumper on the board positioned for full speed.
And actually i am using a simple board now based on it.
Moreover the fact that " the ADuM4160 board needs an external PS " it is actually a plus for me because i can "inject" cleaner power in the usb cable downstream the isolator.
Main problem would be the introduction of jitter of any nature in the signal.
I do not have a clue about this however.
Thanks a lot again for the very helpful advice.
Kind regards,
bg
Edits: 04/18/16 04/18/16Follow Ups:
Regarding the "ADuM4160 is USB1 only" does this mean reduced speed?
If you mean "Is the ADuM4160 (USB1) slower than Intona (USB2)?", the answer is, obviously, "Yes". If you mean "Does it matter that the ADuM4160 is slower than the Intona?", the answer is "In the audio context generally and in your context in particular, almost certainly not" but it does no harm to be aware of possible limitations.
Main problem would be the introduction of jitter of any nature in the signal.
The isolators in both devices inevitably add jitter to the signal though the Intona's re-clocking may well take care of it. (It's not clear from the Intona site how it reclocks.)
I can't say how much a little added jitter matters in the context of sub-48KHz data but my guess would be "Probably not much". Though I haven't compared it (can't meaningfully compare it) with the Intona, I can safely say that the ADuM4160 made the system I was using at the time sound better.
HTH
D
Hi and thanks a lot !
Your words " I can safely say that the ADuM4160 made the system I was using at the time sound better " tell me exactly what i was hoping to hear.
I wanted to know if the chip can have a place in an audio chain.
Now it is connected with a very cheap SMPS but i have another one linear and better available to try out.
Thank you very much again for the precious advice.
Kind regards,
bg
I wanted to know if the chip can have a place in an audio chain.
See link for audio-related details of a suitable product. (There are others.) Search also for ADuM4160 in this forum for lengthy (and sometimes even helpful) discussions on it from five or six years ago.
D
Hi ! thanks for the link.
I am testing the one in the picture
the idea would be to try different power supply (maybe a battery).
Thanks a lot again.
Kind regards,
bg
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: