|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
89.100.52.67
In Reply to: RE: Improved Regen sound posted by theob on November 24, 2015 at 11:50:03
No, I've never tried that config - battery powered Regen + Regen being powered from DC input.
Your config is:
- battery powered Regen
- feeding another Regen which is DC powered
My conjecture was that bypassing the regulators in the battery powered Regen either reduced low frequency noise and/or improved the transient response of the PS.
So putting a DC input powered Regen after the battery powered one MAY work against these improvements of the battery powered Regen.
But I could be wrong!
Follow Ups:
My REGEN worked when fed with 5 volts. I didn't realize that the power source was only outputting 5 volts so I wasn't looking for a sound quality difference, but if there was one it certainly didn't jump out. (This is with an unmodified Regen.)
If you have multiple devices wired into a chain between the computer and the DAC there are lots of combinations to try! More combinations than time, ...
Tony Lauck
"Diversity is the law of nature; no two entities in this universe are uniform." - P.R. Sarkar
It may output signals but certainly the TPS regulators won't work properly unless yours are seriously out of spec.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: