|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
64.122.72.31
In Reply to: RE: I just need some pointers as to what is meaningful to measure posted by Penguin on April 06, 2015 at 07:37:16
You will find a schematic that is quite similar to your amp at the link below. The driver voltages will be nearly the same:
Cathodes of V1 about 0.3V
Plates of V2: about 175V
Cathodes of V4: about -65V
Plate of V4: about 275V
B+ and B- are about 300V
To get an idea of your power tubes take a look at this link
If your power tubes are good it may be that some of the resistors in the output section have failed. In your amp the larger resistors on the power tube sockets are 1 ohm 5 watts. Some earlier versions have 3 watt resistors.
Follow Ups:
You are great :)...
Thank you again.
dee
;-D
True terror is to wake up one morning and discover that your high school class is running the country.
quote by Kurt Vonnegut
Have you had time to evaluate the amplifier using the schematic? Have you identified the issue?
Thanks.
gardens took priority :(....Honeydo list expansion....
dee
;-D
True terror is to wake up one morning and discover that your high school class is running the country.
quote by Kurt Vonnegut
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: