Welcome! Need support, you got it. Or share your ideas and experiences.
Return to Planar Speaker Asylum
71.62.208.148
In Reply to: RE: First Watt B4 to Bi-Amp Magnepan 3.6's posted by 66mgb on October 03, 2016 at 08:53:56
Don't have a B4 or 3.6 but I suggest a 4th order LP set at 200 Hz and a 1st order HP set at 240 Hz. These settings are different from those suggested by Magnepan but are almost identical to the OEM crossover.
I married the perfect woman. The downside is everything that goes wrong is my fault.
Edits: 10/04/16Follow Ups:
My active crossover have 4th order low pass at 280 Hz (-6dB) and 1st order high pass at 200 Hz. The high pass can be done passive. The BĪ is a flexible but expensive solution...
Not exactly cheap, but a lot cheaper than the Bryston, and more flexible, offering 4th order-24/dB octave filtering; the Bryston doesn't. The B4 also has many more x/o frequencies that does the Bryston, and is built with Jfets operated with no feedback. The B4's circuitry is free of opamps, too (as is the Bryston, but not the Marchand).
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: