Welcome! Need support, you got it. Or share your ideas and experiences.
Return to Planar Speaker Asylum
73.147.174.227
In Reply to: RE: That schematic doesn't make any sense to me, Davey ... posted by pistonengine08 on July 10, 2015 at 18:24:11
I have been working on a model for biamping. The model will have the mid-tweeter and supertweeter still in a series configuration but paralleled to the woofer. If you can get me those impedances, I believe I can get a pretty good simulation which can then be converted to a AXLLO.
Follow Ups:
Impedance of the drivers? I'm sure I'll need more than my multimeter. Can you point me in right direction?Edit - unless you're looking for straight resistive values - that's easy enough.
Also I get 116.8 for the cap bank, but I also have 1.7i.
Edits: 07/10/15
Yes, the drivers have almost no reactance so the simple resistance is all that's needed. You may have to disconnect the connections at the drivers to get the correct values.
FWIW, the 1 mfd difference (115.8 v 116.8) is immaterial as the caps have a 5-10% tolerance and it is likely that the two sides (left and right) differ by more than 1 mfd anyway.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: