Welcome! Need support, you got it. Or share your ideas and experiences.
Return to Planar Speaker Asylum
71.67.188.239
In Reply to: RE: Quicksilver tubes on the midrange panels/ribbons - MGIIIa's posted by ejhoove on April 25, 2015 at 08:46:14
Have you managed to raise the QS mini tweeter amp's signal at the Behringer XO tweeter output to a high enough level to match the rest of the speaker as Davey suggested?
Edits: 04/30/15Follow Ups:
The Mini's will be added in the next day or so. Work keeps interfering! :^(
Regards,
Jim
First - Sorry for the double post!
Well it will be a good day! The M60's are driving the Midrange panels, and the Mini's are driving the Riboons. Very fluid and smooth with very good drive and attack while showing no signs of glare or bloat. So far I now understand why many run tubes on their Maggies. I will take today to dial them in level wise, then try and tidy up the wiring tomorrow after church. I'm running EL34 tubes in both amps - JJ Blue Bottles in the M60's and Svetlana's in the Minis.
I'm only using 2 of the 3 A200s, 1 for the subs, and one for the Bass Panels. When I get some muscle to help I'll remove the spare A200 from the stack. I ran the system at a pretty high volume for 2 CD's and the only thing that was more than warm to the touch were the tubes which I did not check. :^)
Regards,
Jim
What is your subwoofer XO freq?
Did you get slap with the speakers run full range?
My subwoofers cross over at 42Hz using a NHT X1 crossover. Even running full range they have never slapped.
Regards,
Jim
The Mini's will be added in the next day or so. Work keeps interfering! :^(
Regards,
Jim
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: