Planar Speaker Asylum

Welcome! Need support, you got it. Or share your ideas and experiences.

Planar Speaker Asylum

Analysis Audio versus Magnepan

68.4.168.45

I currently have MG20.1s and Tympani IVas. I have tried over the last year to create my own Tympani using the MG20.1s with the Tympani Iva bass panels, however, have not been able to recreate the unique characteristics of the Tympani using the MG20.1. I even borrowed another pair of MG20.1s from a friend and used the bass section of the second pair without success. I have recently noticed that Analysis Audio is coming out with a new speaker that adds a second bass panel separate from the main panel. Has anybody any experience with these? How do the latest Analysis Audio planers compare to the 20.7s? By the way I use Krell FPB amps.

Follow Ups:

RE: Analysis Audio versus Magnepan - BobM 08:35:09 03/18/15 (0)
On Apogees, the bass panels are trnsioned side to side. The ribbon tweeter is tensioned top to bottom.

A gentleman is best defined as someone who knows how to play the accordion ... and doesn't.
RE: Analysis Audio versus Magnepan - JBen 22:43:42 03/15/15 (3)
K, welcome! Have you been visiting the forums for a long while, perhaps quietly, or is this first foray into this one? If you can mention "what" it is that you are missing despite your good attempts so far, we may come up with some more ideas.
Also, how far are you willing to go...in terms of electronics (DIY?) and frame/stands tweaks?

Edits: 03/15/15
- RE: Analysis Audio versus Magnepan - kmw510 09:44:15 03/16/15 (1)
  Hello JBen,
  I have been reading this forum for about 3 years now. The only time I posted was about a year ago asking if anybody had tried to recreate tympanis with current model panels. At that time nobody had a proposed solution. I have tried just simply substituting the mg20.1 mid/tweeter for the tympani iva mid/tweeter, using the tympani bass panels to augment the mg20.1, using pass labs active x-over to tri amp the mg20.1 mid/tweet and tympani bass panels, using a second pair of mg20.1 and doubling up on the bass panels. The soundstage that the tympani iva created for orchestral pieces in particular was lost in the mg20.1. With the tympani iva I am in the fifth row fully immersed with sound that wraps around my head and recreates believable depth. The tympani also has a palpability that the mg20.1 doesn't have, and yes I do realize that this could be a psycho-acoustic effect, but I like it all the same.
  - RE: Analysis Audio versus Magnepan - JBen 10:18:58 03/16/15 (0)
    [Got a lucky lunch break sneak-out and saw this.]
    
    I myself like to have the orchestra's spread 3D-imaged and wall-busting wide, behind the Maggies...and deep back outside the room, as may be needed in the recording. I take it that you want the closer feel to the stage, but probably still 3D-imaged inside the stage.
    
    It sure ends up being partly psycho-acoustics but there are a few "non-standard" positionings that may achieve this for you. I think that most current participants in this thread have experimented with some of them. Stuff like the "Rooze" and parallel Maggies (almost like large headphones) plus many near-field variants may work. I would not be surprised if you already tested some. They are not practical in my room and thus, I am not experienced enough to provide useful input. (On regular positioning...I could be useful, and so would others here.)
    
    OTOH, the ability to hold the stage elements themselves in 3D and textured modes is largely aided by the electronic feeds & electromagnetic fileds, not just speaker positionings. On that, I can share some useful stuff. And so can everyone on this thread already; you got the good "first responders" before I came in.
    
    If you bring us up-to-date on the whole current system, room, and things tried already, I suspect you'll get 10 cents worth of effort back, with interest.
- RE: Analysis Audio versus Magnepan - Roger Gustavsson 06:52:05 03/16/15 (0)
  A picture of the insdes of a Analysis speaker, showing the surround/suspension around the perimeter of the diaphragm.
RE: Analysis Audio versus Magnepan - Norman M 11:11:32 03/14/15 (30)
You are trying to make a hybrid by using your Tympani IV-A's bass panels + your MG 20.1 in an attempt to "recreate the unique characteristics of the Tympani using the MG20.1"? I must be missing something, or perhaps senility has set in. :-(
- RE: Analysis Audio versus Magnepan - kmw510 09:56:32 03/16/15 (29)
  Hello Norman,
  The Tympani iva has three separate panels. One for the mid planar and ribbon tweeter, one for upper bass, and one for lower bass. The mg20.1 uses one larger panel and places the lower and upper bass and mid planers in the same panel along with the ribbon tweeter. According to magnepan the basic planar panels are improved, the structural support of the panels is improved, the crossover is improved, and the ribbon voiced to solve brightness issues. At the same time the bass panels have less area and the panels are not as free from the enclosure as in the tympani iva. Although I agree the mg20.1 has improved the basic sound the mg20.1 lost two characteristics of the tympani iva, soundstage and palpability (can't explain this but the tympani iva has a certain you are there feeling). Thinking that this could be the 3 panel config and crossovers of the tympani iva I wanted to recreate the configuration using the improved mid/highs of the mg20.1. I basically am trying to recreate the tympani configuration with the current improved mid panels and ribbon tweeters.
  - RE: Analysis Audio versus Magnepan - Satie 11:17:33 03/17/15 (0)
    I think the basic difference between the 20.1 and Tympani IVa performance is in the midrange and tweeter - where spatial performance is created - the 3 panels can be oriented to have the lower mids covered by the mid and bass and the upper mids/low treble produced by mids and tweeter to be time aligned at a variety of angles. The MG20.1 can only be time aligned at one toe in angle fairly close to face forwards, which may not be a favorable one for the backwave reflections providing good ambiance. The time alignment has an impact on the size of the soundstage and on image precision.
    
    The TIVa midrange compresses at lower volumes than does the midrange of the 20.1 so provides a better dynamic performance. Also useful is the extension of the bottom end cuttoff of the midrange in the 20.1 to an octave lower.
    
    I use a line of Neo8 drivers to replace the mids of my TIV which allows the mids to operate down to a bit over 200hz and up into the top octave. The Neo8 is far more dynamic and precise than the TIVa and 20.1 midrange.. In one successful arrangement the XO is a symmetrical 1st order and the panels are time aligned. XO is at 275 and 6 khz and the imaging is the best I have ever heard on any system. A somewhat less successful arrangement in this regard is the Limage setup for Tympani with great bass but difficult time alignment issues which I solved by having the bass rolled off at LR4 and kept the mid HP filter appx at 100hz (while output does not come into play till an octave higher up) and dropped the LP filter entirely. Then I XO the tweeter as a supertweeter at appx 11Khz (I tried both 1st order which is better for clarity and a low q 5th order which is better for imaging).
    
    The dispersion of the TIVa bass panels in the upper bass in multiple directions is a contributor to the sense of envelopment.
  - RE: Analysis Audio versus Magnepan - Norman M 12:56:09 03/16/15 (27)
    Oh, "The Impossible Dream".
    I tried doing exactly what you have described. Only substituting a 3.6 which I do have, didn't ever see my way clear of justifying the cost of a 20.X, (neither would wifey) plus all four Tympani IV-A Bass panels, which I also do have. IIRC my Mrs. bought a fur coat, before the days of PETA!, so I could buy a pair of IV-As.) Although satisfying at first, I grew weary of the sound from all four IV-A Bass panels + my 3.6Rs over the long haul, so I'm back to the IV-As all by themselves. IME experience the IV-A 'loads' a room with sound in a way none other can, right out of the box using Magnepan's placement instructions, and no tweaks required. Believe it or not, you might find using a Carver C-9 Hologram Generator beneficial, often seen and inexpensive on fleaBay. It can be easily 'inserted' or by-passed in a system without wiring/rewiring, so nearly instantaneous comparisons are possible (depending upon how far away you are seated from the C-9, mine is less than an arm's length away. I've owned a C-9 from the time of its introduction and find it 'cool' for many recordings, and not beneficial for others. E.g., synthesizer type recordings, such as those of Wendy Carlos or Don Dorsey's Telarcs can be both mind and ear bending, appearing as if stretching sound out beyond the edges of my speakers but all across the width of the room, and just as Bob Carver claimed, it can seem to wrap sound around me.
    - RE: Analysis Audio versus Magnepan - JBen 14:08:26 03/16/15 (26)
      Impossible Dream? Oh, you mean that we all have TWO of you to assist on this endeavor! LOL! It would be great to see you being able to ferry those panels around just to try new angles, Norman. (More for health reasons than just audio...it is great exercise...if the back can take it...mine would burst in pieces, I think : - )) .
      Somehow, however, I get the impression that you are happy enough as things are, and for good reasons.
      
      Edits: 03/16/15
      - RE: Analysis Audio versus Magnepan - Norman M 16:02:55 03/16/15 (25)
        
        In Reply to: RE: Analysis Audio versus Magnepan posted by JBen on March 16, 2015 at 14:08:26
        
        Hi Ben,
        Thanks for your reply. In good health, and presently in aged poorer health, I've been ferrying those speakers around my listening room for 23 years (that anniversary came up this week). After listening at each and every new location/angle, etc., etc., I've returned to the present one so, I'm resigned to having them as they are.
        
        RE: Analysis Audio versus Magnepan - JBen 17:02:34 03/16/15 (24)
        
        In Reply to: RE: Analysis Audio versus Magnepan posted by Norman M on March 16, 2015 at 16:02:55
        
        Norman, I am guessing that if even you had such a hard time, perhaps the challenge is analogous to mating ordinary woofers to any planar...maybe even worse.
        
        In recent weeks I finally embarked on adding cone woofers for use under 40Hz with my modded MMGs. Darn, the closer one gets to the goal, the harder it gets! However, I am applying some acoustic measuring and...there's light at the end of the tunnel (I am almost afraid to say).
        
        To both you and the OP, I would not mind helping in implementing the software in a PC. The required calibrated microphone and associated items are so cheap these days that <$30 could get one in the game. With this, time alignment would be less cumbersome and the feedback on impulse, frequencies & distortion can help tremendously.
        
        (LOL, I almost know what you are going to say. If I am right, there's a gentleman in PA that may throw some light on it.)
        
        Microphone recommendation - MaggiesAndCats 12:56:29 03/18/15 (7)
        
        In Reply to: RE: Analysis Audio versus Magnepan posted by JBen on March 16, 2015 at 17:02:34
        
        JBen,
        
        Do you have a recommendation for a calibrated microphone? My system has been in boxes for a year and a half but will be resurrected in the new place soon. I'd like to take a look at using the mic with my DCX 2496, which has XLR connections.
        
        Thanks,
        
        Steve
        
        RE: Microphone recommendation - JBen 14:13:22 03/18/15 (6)
        
        In Reply to: RE: Microphone recommendation posted by MaggiesAndCats on March 18, 2015 at 12:56:29
        
        Hi Steve! I have two Behringer ECM8000 and one Dayton EMM-6, all with their individual calibration files. However, one of the Behringer mics fell on a bare floor and became erratic...the Dayton has taken similar punishment and kept going.
        
        These above are all XLR and require the phantom power supply. They can be bought for <$100 professionally calibrated. In fact, Cross-Spectrum supplies the Dayton EMM-6 with their own great "basic" custom calibration for about $75. OTOH, Dayton offers the same mic for about 50 bucks, with a quite decent calibration included. Dayton's offer is more than enough for most home audio measurements. Perhaps important for the DCX, if a calibration file can't be loaded, it is very likely that these mics are linear enough anyway.
        
        Ironically, one can get a decent-enough calibrated microphone for <20 bucks. I have tried a couple of the Dayton iMM-6. One is now elsewhere, reading tests that we will show here soon. The other is at home, as backup if my main gear flames out suddenly. This model lacks the S/N ratio of the larger models but the ones that I tried were clean enough. These inexpensive little suckers are also very sensitive. Just this weekend one of them "heard" things that we missed while doing some sweeps with REW. The iMM-6 works on PCs, laptops, Android devices and iThings. There is some audio software that can use its calibration file. However, this mic is not XLR; the DCX 2496 may not be able to use one?
        
        There is a Dayton USB mic, uMM-6. I have not tested it myself but it is getting good reviews also. (I hardly think that the DCX 2496 could use it but some folks may need one for other hardware.)
        
        Let me know if you need more detail. Good luck!
        
        Thanks JBen - MaggiesAndCats 06:53:55 03/19/15 (5)
        
        In Reply to: RE: Microphone recommendation posted by JBen on March 18, 2015 at 14:13:22
        
        I see that Cross-Spectrum has stopped working with the Behringer ECM8000 due to poor quality. The DCX 2496 has a feature called auto align that is supposed to adjust for phase cancellations, and yes, the mic has to be XLR and the DCX supplies phantom power. My new music room is on the small side for my MGIII's - 12'x 17' if I remember right - and some level of detection/correction could be beneficial. Along with some placement of book shelves to dampen wall refelctions, etc. Maybe even a Magnepan-approved fake ficus plant or two!
        
        I'll look into the PC-based software and mics as well.
        
        Thanks again for the good information!
        
        Regards,
        
        Steve
        
        RE: Thanks JBen - JBen 22:41:59 03/19/15 (2)
        
        In Reply to: RE: Thanks JBen posted by MaggiesAndCats on March 19, 2015 at 06:53:55
        
        If you can go via PC, you would likely be better off than limiting to the DCX, like Davey suggests. You would get a wider range of options and better software choices. REW alone is a little powerhouse just by itself, and costs nothing. It helped me to tune my Maggies promptly, starting in 2008.
        
        My room is 12x25x8h. Depending on the height, we probably will observe some similar room modes. Remind me later, when you can measure, and I'll see what may serve you. I do have notched (or truncated) corners behind the Maggies. They make a positive SQ contribution.
        
        RE: Thanks JBen - MaggiesAndCats 08:05:40 03/20/15 (1)
        
        In Reply to: RE: Thanks JBen posted by JBen on March 19, 2015 at 22:41:59
        
        My room isn't quite rectangular as there is a bump out for a window behind the left speaker position. The ceiling is ~8'. What do you mean by notched corners? Having a shorter long wall than you I'll be more near field in my listening position, which I've had to do since I bought my Maggies ~30 years ago. I'll have to put a baffle behind the left speaker to mimic the wall behind the right speaker so the reflected sound delay is the same. There is a recessed window behind the left and wall behind the right. I suppose I could use the DCX to change the delay on the left channel, but the reflections off the glass and sheetrock could be different. I don't have much in the way of WAF issues this time around (in more ways than one...)as the room is my mine to use for music.
        
        Regards,
        
        Steve
        
        RE: Thanks JBen - JBen 11:10:17 03/20/15 (0)
        
        In Reply to: RE: Thanks JBen posted by MaggiesAndCats on March 20, 2015 at 08:05:40
        
        Steve, I think I have an old diagram where I drew the corners. I'll post it when I get home this evening.
        
        It does sound like we have a little challenge with that nook? in your room.
        
        RE: Thanks JBen - Davey 10:06:03 03/19/15 (1)
        
        In Reply to: RE: Thanks JBen posted by MaggiesAndCats on March 19, 2015 at 06:53:55
        
        The DCX auto-alignment feature is fairly crude and targeted for the professional (longer delays) and not a typical domestic environment. Because of the small acoustic space the results it will give will not be consistent and accurate.
        Much better to use one of the dedicated PC-based systems like REW or similar.
        
        For low-frequency room correction it hardly matters worrying about a calibration file. The minor corrections contained within will be MUCH less than any peaks/valleys created from room modes or boundaries.
        
        If you haven't yet purchased, I would suggest one of the newer USB-connected microphones. These bypass some of the pitfalls of microphone preamps and level settings.
        http://www.minidsp.com/products/acoustic-measurement/umik-1
        
        Cheers,
        
        Dave.
        
        Thanks to you too Davey - MaggiesAndCats 07:47:17 03/20/15 (0)
        
        In Reply to: RE: Thanks JBen posted by Davey on March 19, 2015 at 10:06:03
        
        Sounds like I should be looking at using PC-based applications to help tune the DCX settings. Of course, what it really comes down to is if I like it, it's good. However, it would be interesting to know, for my room and equipment, what speaker placement, room mods, and crossover settings combine to give me a pleasuable listening experience. It's conceivable I could come up with different XO settings for different volume levels. Maybe flatter at higher volumes and a boost here and there for lower levels. Now if I plug the source directly into the DCX, use the DCX volume control, and automatically adjust the settings based on the output level... Hopefully after we move and get settled in I can do some experimenting.
        
        Regards,
        
        Steve
        
        RE: Analysis Audio versus Magnepan - old guy 42 09:20:47 03/17/15 (0)
        
        In Reply to: RE: Analysis Audio versus Magnepan posted by JBen on March 16, 2015 at 17:02:34
        
        Hi. J
        
        You posted..."The required microphone and associated items are so cheap these days that <$30 could get you in the game". This is 100% true.
        
        I also confirm the "ton" of help that you have provided this no-tech old man!!!
        
        Thanks again J....old guy
        
        RE: "adding cone woofers for use under 40Hz with my modded MMGs." ... - andyr 18:42:55 03/16/15 (14)
        
        In Reply to: RE: Analysis Audio versus Magnepan posted by JBen on March 16, 2015 at 17:02:34
        
        Very similar to the path I have just embarked on, JBen. :-))
        After 20+ years of Maggie ownership, I will be adding a pair of 15", custom-made sealed subs to increase my enjoyment of Bach organ music ... and Yello! This won't be happening until November this year - when we move into our new house (the joinery in the listening room for all the equipment / LP storage has an 18" wide space at each front corner, for the subs to hide). So far all I have done is pay a deposit - and ask a lot of questions of the maker.
        Answers to these Qs have resulted in a new paradigm for my active Maggies - moving from 3-way analogue active XO to 4-way digital active XO (the '4th way' controls the subs). The sub maker uses either a miniDSP unit or a Behringer 2496 to provide the sub LP / bass panel HP filters. These also provide delay for the bass panels ... to match up with the subs (who have an intrinsic delay resulting from the slope used and the plate amp driving the Dayton Ultimax drivers).
        If you delay the woofers ... you have to delay the mids & ribbons by the same amount - so, unfortunately it's out with the analogue XO and in with a digital XO! :-(( For someone who is wedded to vinyl, this need serious consideration! ;-))
        However, one thing that pushed me over the edge was that both the miniDSP unit and the DCX2496 will also provide room correction - which is always a good thing for <200Hz.
        
        Regards,
        Andy
        PS: I will be posting at the end of the year, when the subs are in and configured.
        
        Edits: 03/16/15
        
        RE: "adding cone woofers for use under 40Hz with my modded MMGs." ... - Barry 22:00:05 03/16/15 (12)
        
        In Reply to: RE: "adding cone woofers for use under 40Hz with my modded MMGs." ... posted by andyr on March 16, 2015 at 18:42:55
        
        I'm not sure I understand, "If you delay the woofers ... you have to delay the mids & ribbons by the same amount".
        
        DSP gets you both phase and impulse alignment typically by delaying the mains, never the subs. That's to offset the time lag from the low pass (subwoofer) filter. An 80Hz 2nd order crossover frequency has an inherent group delay of about 3.125ms equivalent to 3.5ft.
        
        You could have a speaker setup where the subs are several feet closer to the listening position than the mains which would more than offset the LP delay, but that's a pretty unusual case.
        
        I'm looking forward to your experiments!
        
        Sorry, Barry - I didn't make myself as clear as I should've ... - andyr 01:45:36 03/17/15 (11)
        
        In Reply to: RE: "adding cone woofers for use under 40Hz with my modded MMGs." ... posted by Barry on March 16, 2015 at 22:00:05
        
        When I said " delaying the woofers " - I meant delaying the Maggie bass panels, to match the delay inherent in the sub drivers.
        
        And if the Maggie bass panels are delayed ... the mids & ribbons must follow.
        
        I believe you when you say " An 80Hz, 2nd order crossover frequency has an inherent group delay of about 3.125ms equivalent to 3.5ft. ". I would ideally like a 24dB slope but:
        
        * I know this produces more delay ... and the miniDSP unit I would like to use has a maximum delay of only 7ms - so a 24dB slope may not be feasible. :-((
        
        * to make the situation worse, my subs will be 3-4' further away from my ears than the bass panels - so it would seem we are already up to ~6.25mS, using 12dB slopes @ 80Hz!
        
        To keep to 24dB, the guy who builds the subs - who will be installing them and has the equipment to tailor and measure the DSP setup - will try increasing the XO frequency to, say, 120Hz (which I understand will not be a problem, in terms of the directionality of low bass, due to the symmetric sub placement and the fact that the subs are relatively close to the bass panels) ... but this may still not produce a low-enough delay ... so I may have to move to 12dB slopes.
        
        Regards,
        
        Andy
        
        This should save you some time & give you something else to do - Barry 15:40:12 03/17/15 (10)
        
        In Reply to: RE: Sorry, Barry - I didn't make myself as clear as I should've ... posted by andyr on March 17, 2015 at 01:45:36
        
        The link at the very bottom is helpful, as is the whole site.
        
        The wall wort power supply of the DSpeaker Antimode 2 Dual Core for room correction that I'm playing with now is the not all that transparent. You'll encounter this with miniDSP.
        
        If you've anticipated this, you may want to build or buy a better one, so here's a download article that compares more than a dozen commercially available & Diy PS designs. There are also charts of noise, PSRR, etc. in the Linear Audio site itself:
        
        http://linearaudio.net/article-detail/2128
        
        Oh, in case you were wondering; "that Barry" is not this Barry.
        
        Have fun.
        
        http://www.soundoctor.com/freq.htm (Open in New Window)
        
        RE: This should save you some time & give you something else to do - Satie 20:43:04 03/17/15 (8)
        
        In Reply to: RE: This should save you some time & give you something else to do posted by Barry on March 17, 2015 at 15:40:12
        
        You don't need to be time aligned in these low frequencies, being in phase in the XO region is good enough. The cycles are long so bass transients are not reproduced by the bass drivers at all. Often you just need to delay or set further the bass so long as you don't high pass or do that at low order.
        
        Some DSPs will have a phaseless XO option so only the DSP's latency and added delay are active, so they may have a lower minimal delay than an analog XO at low freq.
        
        For the uninitated like me - Barry 18:13:34 03/18/15 (7)
        
        In Reply to: RE: This should save you some time & give you something else to do posted by Satie on March 17, 2015 at 20:43:04
        
        I'm still learning about this and was actually commenting more conceptually. I don't have a good sense of what all various DSPs actually do for bass management. I agree about the XO region needing to be in phase but it's actually easier than that.
        According to Toole who's saying the same thing that you are in different words, subwoofer frequencies (80 Hz or less), are minimum phase. In English, or your language of choice, that means, for the listener sweet spot, FREQUENCY RESPONSE IS ALL YOU CARE ABOUT about and you want to get it flat. Frequency response contains all the information about phase and transient response that matters at low frequencies. You can move mains and subs, the listening position, or use parametric equalization to accomplish that. If it's flat when you're finished, "mission accomplished" and it will sound great. That's helpful for anyone who doesn't understand all the technical stuff.
        
        Edits: 03/18/15
        
        RE: For the uninitated like me - Satie 06:55:02 03/20/15 (0)
        
        In Reply to: RE: For the uninitated like me posted by Barry on March 18, 2015 at 18:13:34
        
        My own experience is that phase and time alignment are useful for "bass imaging" which was not recognized as something that exists in Toole's day. It is significant in determining acoustic dimensions of the recording space, plays into the way we determine image size
        
        You can have atrocious FR and still obtain amazing lateral imaging. You also can get good depth but somewhat incorrect layering. Event timing in the structure of a transient determines the bulk of imaging cues and is extremely sensitive to precise time response. The localization is entirely over with before pitch is determined by the ear. We are talking 3msec for transient localization (0.1 to 10 ms) then size is determined and "texture" only then is the tone determined (10 to 30 msec).
        
        Prior to Toole and the frequency domain theory taking over as dogma in psycho-acoustics there was active research into transients, that was resumed more recently. I posted an article that consolidates some of the research into transients about a year ago. It is not a difficult read.
        
        http://www.bodziosoftware.com.au/Attributes_Of_Linear_Phase_Loudspeakers.pdf
        
        RE: For the uninitated like me - Roger Gustavsson 00:24:04 03/19/15 (5)
        
        In Reply to: RE: For the uninitated like me posted by Barry on March 18, 2015 at 18:13:34
        
        I do not want the frequency response flat at the listening position. A microphone is also not equal to our ears/hearing. A microphone can give you a hint of what is right/wrong but it cannot give you the whole truth. In the end it is matter of psycho-acoustics and a microphone cannot tell you much about that.
        
        RE: For the uninitated like me, no microphone - A.Wayne 12:32:02 03/27/15 (4)
        
        In Reply to: RE: For the uninitated like me posted by Roger Gustavsson on March 19, 2015 at 00:24:04
        
        @ Roger G,
        
        You are correct, the microphone will only say flat or not, nothing to do with taste and biases, some like it a bit fat in the Bass. some not...
        
        Regards...
        
        RE: For the uninitated like me, no microphone - JLindborg 14:50:23 03/27/15 (3)
        
        In Reply to: RE: For the uninitated like me, no microphone posted by A.Wayne on March 27, 2015 at 12:32:02
        
        Can You explain more of what You mean by some like it more fat in the bass?
        
        It's easy to interpret it like flat is the right sound.
        The truth is rather not if You listen to a recording through flat measured frequency and compare it to real life.
        
        Also, a flat frequency response does not take dynamic compression into account.
        A frequency plot is only telling You about the frequency balance at a specific db continuous output.
        
        Cheers!
        The one who succeeded was the one who didn't know it was impossible.
        
        RE: For the uninitated like me, no microphone - Roger Gustavsson 07:56:11 03/28/15 (2)
        
        In Reply to: RE: For the uninitated like me, no microphone posted by JLindborg on March 27, 2015 at 14:50:23
        
        A microphone is a very simple device compared to our hearing. An in-room measurement should never be flat at the listening position. A psycho-acoustic flat response is something different! That is what we want and it is not a straight line in a diagram. This could be a good start, http://i47.tinypic.com/rrt8yd.jpg , maybe a bit more in the low bass region. This is for pink noise measurement.
        
        RE: For the uninitated like me, no microphone - A.Wayne 16:53:56 03/28/15 (0)
        
        In Reply to: RE: For the uninitated like me, no microphone posted by Roger Gustavsson on March 28, 2015 at 07:56:11
        
        Depends, you want your FM curve anechoic or at the listening position, the microphone is just a tool, what you may or may not like has nothing to do with the FR being flat.
        I dont think -8 db at 12K would work for me at the listening position, then again it's pink noise from a stereo pr, so it's not the same and the droop at 10K is normal due to being off axis to tweeters and stereo phasing.
        
        Then again you are using a simple microphone with pinknoise ... :)
        
        Edits: 03/28/15 03/28/15
        
        RE: For the uninitated like me, no microphone - JLindborg 08:19:39 03/28/15 (0)
        
        In Reply to: RE: For the uninitated like me, no microphone posted by Roger Gustavsson on March 28, 2015 at 07:56:11
        
        Thanks for the link Roger!
        The one who succeeded was the one who didn't know it was impossible.
        
        Thanks for the links, Barry ... - andyr 16:18:15 03/17/15 (0)
        
        In Reply to: RE: This should save you some time & give you something else to do posted by Barry on March 17, 2015 at 15:40:12
        
        I will study them both.
        BTW, re. the wallwart for the DSpeaker Antimode 2 Dual Core ... I notice that its PS is a 12v DC unit - ie. a SMPSU.
        I've done quite a few experiments recently with SMPSUs and have the following suggestions for you:
        Experiment #1 - replacing the 24v DC SMPSU driving an A.N.T 'Kora' phono stage with a 24v SLA supply.
        A mate who owns the 'Kora' was impressed by my own battery-powered 'Muse' phono stage. So I rigged up a couple of 12v SLAs in series for him to try with his 'Kora' - having:
        * an on/off switch, and
        * a 40uF film cap across the batteries (very important to have this!).
        This SLA supply made his 'Kora' sound much better ... so he ordered an SLA supply from me. This is actually not a cheap exercise! By the time you include batteries, a nice case, the cap, a charger, a DC plug for the output and a DC socket for the charger ... you're looking at USD300! But he's happy to pay this because it elevates his 'Kora' to another level.
        Experiment #2 - putting an isolating transformer plus a Schurter hash-filter between an SMPSU and the wall socket.
        The SMPSU in question was the 48v supply to my TT motor speed controller. Just having an isolating tranny between the MeanWell SMPSU and the wall made the TT sound better - but adding the hash-filter (oriented a particular way! o-) ) lifted the sound up another level! :-))
        I suspect the hash filter wasn't doing anything to the SMPSU itself ... but what it was doing was preventing the crap which most SMPSUs generate in the mains from getting out to 'infect' other components.
        Either approach will enable you to make your DSpeaker Antimode 2 sound better; which one you choose probably depends on how much current it draws and whether it still works when the battery has discharged down to, say, 11v.
        
        Regards,
        Andy
        
        Edits: 03/17/15
        
        RE: "adding cone woofers for use under 40Hz with my modded MMGs." ... - JBen 19:38:28 03/16/15 (0)
        
        In Reply to: RE: "adding cone woofers for use under 40Hz with my modded MMGs." ... posted by andyr on March 16, 2015 at 18:42:55
        
        LOL! Yes, you and I are facing a few similar challenges. I actually cannot afford to go back to digital once the initial conversion to analog happens to the music. In fact, your Frankies would remain mightily charming even in the face of something like this. OTOH, my MMGs need every bit of help to keep their sweet charms.
        
        Now, my bass goals are less "deep" for the time being. I live in an apartment. Still, the 10" woofers that I am adding can easily run amok if I am not careful. By going with L/R woofers, two stereo channels and shallow boxes, things are quickly looking up. Time-management success seems to be at hand (ok, more like at arms length : - ))
        
        However, WAF could potentially do me in.
        
        Let's check notes later (visitors on their way from airport).
RE: Analysis Audio versus Magnepan - hahax@verizon.net 19:40:43 03/13/15 (8)
I find them noticeably more dynamic. They can have a 'jump' factor like a really good box speaker. And they do bass really well. This is probably because they actually have a suspension unlike Maggies where the planar drivers are stretched tautly.
- RE: Analysis Audio versus Magnepan - Satie 04:04:08 03/15/15 (7)
  The Apogees had a suspension too and were likewise more dynamic.
  
  However, you can get around some of the Maggie's stiffness at high excursions with gigantic power amps to eat the back emf. Stiffening the frames into a rigid form helps a lot, of course.
  
  Analysis audio has had an add on bass panel option for their top model for quite a while. So I understand this new model has a different midbass/tweeter section and is actually designed as a 3 way?
  - RE: Analysis Audio versus Magnepan - Davey 10:02:33 03/15/15 (6)
    "The Apogees had a suspension too and were likewise more dynamic."
    
    No, I'm afraid not. Apogee's are no different than Magnepan's (in concept) with to regard to woofer "suspension." Both employ a stretched diaphragm transducer securely attached on the perimeter. This is unlike a conventional driver that functions in "pistonic" mode (or attempts to) via a proper suspension, relative to a transducer like a Magnepan that operates in the "breakup" mode at all times.
    
    The Analysis Audio speakers are somewhat different in design but much more similar to Apogee/Magnepan than a conventional speaker. I get the reference to a "suspension" mentioned my hahax, but I think it's 'stretching' the definition.
    
    Cheers,
    
    Dave.
    - RE: Analysis Audio versus Magnepan - hahax@verizon.net 19:54:49 03/15/15 (0)
      The tweeter is a ribbon, not a planar. And the main driver has, I believe, a half roll surround. I got that from the importer who was a member of my Hi Fi club for years.
    - RE: Analysis Audio versus Magnepan - Roger Gustavsson 10:51:08 03/15/15 (4)
      The Apogee driver is a longer stroke driver compared to the Magneplanar type of driver. I think the Apogee can move with less restriction due to its corrogation. It is tightly stretched in just one direction. Analysis have a soft perimeter around its bass driver and it alows more stroke than Magnepan. The Tympani IVa basses can only move 2 mm before hitting the magnets. The older Tympanis just 1.6 mm. That motion is not very linear.
      - RE: Analysis Audio versus Magnepan - Davey 10:58:41 03/15/15 (3)
        
        In Reply to: RE: Analysis Audio versus Magnepan posted by Roger Gustavsson on March 15, 2015 at 10:51:08
        
        Roger,
        
        Yes, I understand but the corrugations of the Apogee drivers are in the same direction as the tensioning force. The static tension is less on an Apogee driver relative to a Magnepan and the excursion capability is somewhat more.....but they still have the same "suspension" mechanism, per se.
        
        I'm pretty well aware of the differences between Apogee's and Magnepan's......I still own both. :)
        
        Dave.
        
        RE: Analysis Audio versus Magnepan - Roger Gustavsson 12:19:45 03/15/15 (2)
        
        In Reply to: RE: Analysis Audio versus Magnepan posted by Davey on March 15, 2015 at 10:58:41
        
        Is not the tension from side to side on the Apogee? There is no tension from top to bottom as it would remove the corrugation.
        
        RE: Analysis Audio versus Magnepan - Davey 16:30:34 03/15/15 (0)
        
        In Reply to: RE: Analysis Audio versus Magnepan posted by Roger Gustavsson on March 15, 2015 at 12:19:45
        
        Yes indeed, only tensioned side to side. There are securing strips on the top and bottom, but those only exist to provide the weather-stripping damping. Those strips are secured with screws but left marginally loose on purpose.
        
        Dave.
        
        RE: Analysis Audio versus Magnepan - JLindborg 13:02:31 03/15/15 (0)
        
        In Reply to: RE: Analysis Audio versus Magnepan posted by Roger Gustavsson on March 15, 2015 at 12:19:45
        
        Exactly Roger.
        You've only got tension in 1 direction to compare with Magnepan that is stretched in all directions.
        And that is not all. Magnepan membranes in general is also restricted in movement by the tuning points.
        What this does to the motion is obvious.
        Cheers!
        The one who succeeded was the one who didn't know it was impossible.
        
        Edits: 03/15/15

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.

This post is made possible by the generous support of people like you and our sponsors:

Michael Percy Audio