Welcome! Need support, you got it. Or share your ideas and experiences.
Return to Planar Speaker Asylum
64.121.235.173
In Reply to: RE: Need to reconnect fuses and jumper. posted by LineSource on February 02, 2015 at 14:20:09
Hi. LS;
Not sure, but this link might help.
Follow Ups:
The photo in the link is incorrect. The yellow wire is common and it shows the tweeter fuse and attenuator block connected to it and in turn to the brown tweeter feed. These components should be connected to the the hot terminal where the red wire is.
Now I know the wiring changed at some point, probably when they "downgraded" the crossover, because the photo and instructions (which I can't find now) I used to do the bypass in the first place left the tweeter out of the circuit, so it must have been from the pre crossover change period. You know....what a BS thing to do to sell more expensive speakers.
LineSource
Hi. Willcycle;
If you scroll down in the link, look for post by that OP titled "Solved".
It looked like good info, but I did tell Line Source it "MIGHT" help.
Many years ago I eliminated the entire stock hook-up and I lost my paper with the hook-up details.
Take care....old guy
I think that will. Thanks!
LineSource
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: