Welcome! Need support, you got it. Or share your ideas and experiences.
Return to Planar Speaker Asylum
206.255.209.123
In Reply to: RE: Acoustat Spectra 22 in a small room? posted by morricab on January 13, 2015 at 13:28:02
They used the same panels so I suspect the difference had to do with component changes in the interfaces - as has occurred frequently in the past. I had ex-Acoustat technician Roy Esposito completely rebuild the interfaces in my 1+1s making a pretty significant sonic difference. I opted for the "air" mod which offer switchable bypass to the tweeter level control. Old vs new:
Speaking of panels, the Acoustats - old and new alike - have 17 micron diaphragms. The Sound Lab panels (along with the latter Quads) use 3 micron diaphragms.
Follow Ups:
The Spectras are in house. I have them hooked up with no name speaker cable as I must reterminate my Kimber from bi wiring to the single binding posts of the Acoustats.
I am amazed by the sound in this small room. So different from the Totems! A wall of sound with real bass. Bass is strong but tuneful in this small room. Can't imaging the need for a sub but I am coming from 5 3/4 inch woofers.
I appear to have lucked out so far no noises, rattles or distortion just beautiful music. They do dominate the room that's for sure. If I knew how to post a picture I would.
Appreciate the advice guys, glad I went for it. Biggest upgrade I have ever made in my system.
Super now what you will find is that this speaker will get better as you improve everything behind it, source, amps cables etc.
I still miss mine sometimes...sniff!
I have an idea you're at the beginning of a long love affair.
You should have fun going through your musical library to hear the beauty and coherency of stats.
If I knew how to post a picture I would.
Place a copy on your computer. Click the "Browse" button beside the "Upload Image" link in the Post a Message! box and locate the file.
Thanks guys. Been a blast so far. E-stat I have a picture on my IPad. How could I post that?
Been experimenting with position. So far the closer I move them to me (further from the wall behind) the better they sound. Getting so close it is like giant electrostatic headphones! They are about 4 feet out from the front wall, 7.5 feet from the listening position and just about as far as I can spread them out, less than a foot from the side walls angled in towards my listening position.
Some quick questions. The floor in my man cave is not even so the wood bases don't sit flat so they rock a little. How do people couple them to the floor? Spikes, sorbothane pucks?
I intend to have the interfaces looked at but have read that the power supply bias level is key to performance. Apparently later versions had a pot on the circuit board to set this, but the guy I got these from says there is none on the Spectra 22 (but his Spectra 33 do have the control). Can anybody shed some light on this?
Ok, I would like to do some routine maintenance on these, can any body shed some light on "vacuuming" the panels? Do you do it with the grill cloth on or do you remove them? Ok how do you remove them? What tool do you use on the vacuum (brush?) , how much suction is safe? Not ready to talk about the hair dry treatment yet.
E-stat I have a picture on my IPad. How could I post that?
Don't know if the upload works with pad devices. Do you have a PC where you could copy the file?
I intend to have the interfaces looked at but have read that the power supply bias level is key to performance.
In the Acoustat world, the bias is fixed. There are no adjustments. My Sound Lab backplates, however, do have bias level controls since they run at much higher voltages.
Ok, I would like to do some routine maintenance on these, can any body shed some light on "vacuuming" the panels?
Vacuuming isn't needed so much as periodic re-tensioning of the diaphragms via a high output hair dryer or heat gun. Search the forum and you'll find lots of posts about that.
Do you do it with the grill cloth on or do you remove them? Ok how do you remove them?
The grill socks are stapled at the top and bottom. In time, you will want to replace the heavy weave cloth with tightly stretched spandex. The factory cloth tends to muffle the top end.
Sit back and enjoy them for a while. And experiment with placement. I might not have them spread as far apart. And precise symmetry will give you the best imaging. I'm talking using string and laser pointers for the best results.
They really are not to big at all!
These should be a fit for you.
Enjoy them.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: