Welcome! Need support, you got it. Or share your ideas and experiences.
Return to Planar Speaker Asylum
70.92.148.124
In Reply to: RE: Yes,... posted by Davey on November 28, 2014 at 15:27:55
That is why I do discuss it as "do at your own risk," and caution people who are not careful, or mechanically inclined not to do it.
Who said anything about magic? If I said anything about it being "magical," it would be an allusion to the emotional experience, not the functionality of it. I don't believe the sonic changes are due to some nebulous, or mysterious effect. I don't give credence to tweaks of all sorts which yield no sensible or audible improvement.
I don't consider doubling the cables a simple change. I consider it a significant change, both electrically in terms of the transmission of the signal, and the resultant sound quality. It seems you are dismissing it offhand. If I read you right, your comments boil down to thinking I'm imagining a difference, but you think that theory shows there cannot be a difference.
The greatest impediment to advancing an audiophile system is the audiophile.
Follow Ups:
Doug,
I didn't dismiss it offhand. And I said nothing about you imagining a difference. Please re-read my posts again.
I simply said a different cable(s) with equivalent RLC parameters will sound identical. How difficult a concept/statement is that to grasp?
You're in good company.....a number of posters on this forum like to read things into my comments that aren't really there. :)
The silly strawman replies are pretty darn irritating.
Cheers,
Dave.
I know the guys at Zu Audio fairly well...My current Speaker Cables are the Zu Event, a hidden gem in Cable Market, IMHO...
I had there Wax Bi-wire Speaker cables for years, due to their cable geometry, they are terminated at the amp end as one hook-up, but they run two full cables on the speaker end...
So, if I understand you correctly, if the speaker end was terminated for each binding post, like the amp end would that achieve what you are talking about without the risk??
So, these pair would be for one speaker??? Right???
If you know the Zu guys at all, they are pretty much game for anything...
Thanks
Mark
speaker cables. I have a similar set done up by Clarity Cable.
Yes, if the speaker end were terminated like the amp end it would be a good illustration of what I do with separate cables. If the speaker was biwirable I would use all four cables on the one speaker channel, say the Left speaker. I would get another set of four and do the other channel, say Right. Sounds crazy, eh? But you should hear it.
With the cables you show you could double wire a pair of speakers L/R with one set of posts each.
It can be tough to lodge all the spades onto the speaker posts. Often I approach the post with the two spades from opposite directions, i.e. one at 12 O'clock and the other at 6 O'clock. You also need to be exquisitely careful that you have all the positive and negative spades clear of each other so as to not cause a short. If you have a speaker binding post wrench it helps to make sure they are snugged down so that they will not budge.
If it helps diagram the connections.
Like I say, this is a play at your own risk proposition. You begin to see why I recheck connections three times. Most of the time I verbally call out the colors of the posts and wiring attached to it, i.e. "Red, red, red.." Then move to the other post, "Black, black black.." By doing so you will be able to catch a mis-wired post. Don't guess at anything; make sure the connections are perfect. I most often use at least one set of banana connectors in place of spades as it obviously makes the connections easier. But I have at times used all spades.
If you can get it to work for you, the sonic benefit should be immediately noticeable.
The greatest impediment to advancing an audiophile system is the audiophile.
This would be further down the road if I was to do this...a pair of bi-wires per side in this configuration...a red+ and black-
I would do spades on the amp end, (my Magtech has very beefy binding posts), and bananas on the speaker end...damn Maggie binding posts...
The King III's x-over's have bi-wire/amp binding posts...so 2 bananas for the highs and 2 bananas for the lows...Maggies would be 1 banana positive and 1 banana negative, with any of the .7 models...I would have them, who ever cable company, do factory terminations...safety first...
New DAC and a Music Server, is next on the hit list...
thanks again...
Mark
Just asking, and only because I don't know the answer (and am not trying to be a smart-ass), don't the 'anti-cable' enthusiasts believe differently about matters relating to cable gauge ?
There's nothing to "believe" about cable gauge. It is what it is.
I'm not sure what an "anti-cable" enthusiast is. Cables can certainly make a difference.....but they have to be evaluated from an engineering standpoint vice all the subjective audiophile hand-waving. There's absolutely nothing magic about cables. :)
Dave.
Anti-cable 'enthusiast'(?):
http://www.positive-feedback.com/Issue18/anticables.htm
Sorry, I thought you were referring to something else.
Yeah, I'm well aware of Paul's offerings. Of course you know that's just a rather catchy name he's called them, but they really ARE cables. :) His cables have an inherent RLC characteristic just like all other cables do. He's just trading off one for another.
Dave.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: