Welcome! Need support, you got it. Or share you ideas and experiences.
Return to MagneQuest/Peerless Forum
24.174.46.195
In Reply to: RE: inductances and loadlines..... posted by Caucasian Blackplate on May 23, 2009 at 13:17:09
I was thinking of a parafeed PP with CCSs on the plates. The center taps have caps that return to the cathodes.
twystd
You know there is no particular reason to put caps to the cathode in a shunt feed PP. If you had a center taped primary you could put a cap between the two sections to insure no unbalanced DC in the windings. But it would probably sound even better to balance the current some other way and eliminate the caps all together. Then you do not need a center tap at all.
Google Marcel and Clovis by Phil Sieg. He has built an amp along these lines.
Michael
Yes Marcel and Clovis is a really interesting design. The design I'm thinking of uses the garter circuit to balance the tubes. I can't have a shared cathode resistor for the garter circuit to work, so it's a PP stage rather than a differential stage.
PP amps usually require a cathode bypass cap for full power. By putting the cap returning to the cathodes, I don't think I'd need a cathode bypass cap, plus they block any DC on the transformer. The thought is to have a really balanced PP stage, with minimal capacitors, and taking advantage of no DC, unbalanced or not, on the transformer.
No telling what it will sound like, it's just an experiment I want to explore. I haven't seen a schematic like it before, and neither have my local DIY friends, so thought it might be interesting. If it shows promise, I will release the schematic to the DIY community. If it sucks oh well, I'll just drop back and punt to something more proven.
twystd
Post a Followup:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2009, Audio Asylum, all rights reserved ]
[ Go Green ]
[ Take5 ]