|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
75.164.204.6
In Reply to: RE: Broken tweeter?? Help! :( posted by KanedaK on August 02, 2016 at 12:45:28
You need to disconnect tweeter and put the same wires on a spare
mid or tweeter you might have (or the working Beyma you have) and
verify a signal. If it sounds normal, then the tweeter has an issue.
If no sound, the problem is probably on the crossover or wiring,
possibly a solder joint. L-pad is probably fine.
Follow Ups:
I did connect another driver, there was sound coming trough, it's the tweeter that's broken.
I have NO IDEA how such a thing can happen.
It worked fine, i disconnected it, repainted the box, reconnected it, it's broken. Crazy. It didn't fall on the floor, I didn't bump into the wall with it, all i did was disconnect the wire, unbolt it from the wood, and put it on a table while i was working on the box. :( no I'm wondering wether I should just get one replacement tweeter; I feel like it'd be better to have two. Won't I get a different sound if I have a brand new tweeter on one side and a 10years old tweeter on the other?
Replace both tweeters.
The very fine gauge coil wire (used in tweeters) is soldered
to the terminal tab...which can break quite easily if they
didn't glue it down properly. That can sometimes be re-soldered.
I guess I'd get a new pair if you plan on keeping them.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: