|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
2.240.155.189
Hello Members,
i construct a double Bass horn as an armchair,
for the Mivoc driver WAL416, 4 driver parallel = 4 Ohm
Aktiv 33-120Hz.
Made for the new DH SAT, or FLUTE, SCHALMEI.any opinion?
hm-moreart DIY horn speaker
http://www.hm-moreart.de/1.htm
Edits: 03/06/16 03/06/16Follow Ups:
you get a massage while you are enjoying any music with heavy bass.....:)
Edits: 03/07/16
A chairs placement in room is a sub optimal place for a bass system, also would cause timing errors and uneven bass pressures in room for any others not seated on the bass system.
What if you are real serious about your computer sound system?
Dave
Hello,
for wave length over 3,4 m in rooms with a bit larger dimension?
look precedence effect, delay in musik, the room is below ~300 Hz dominat.Advantage:
the bass is near the listener , multi direction, and different room reflexions compaired with bass in front of the listener.
+ double horn, low membran movement...and a ergonomic designed armchair to your body.
partly you are right, my old Bassel radiate to the front, you lost the punch, and sounds best if you donīt sit on it
hm-moreart DIY horn speaker
http://www.hm-moreart.de/1.htm
Edits: 03/06/16 03/06/16
There are many who would argue with me, but in my experience a pair of woofers, each fairly near the main speakers, offers real improvement in the sound for serious music listening. This is especially true when a crossover point above 100 Hz is used. Do you plan on a pair of armchair woofer horns?
Hello Don,
one is enough up to 30sqm,
my room is only 22 sqm.
i will built one for the new DH SAT.
in case of the armchair i prefer max. 100 Hz 18 dB, because
man voice begins at 100 Hz and you sit near ;-)
hm-moreart DIY horn speaker
http://www.hm-moreart.de/1.htm
Brings to mind Lynn Olson's ME2 subwoofer. While this approach introduces some challenges, it solves others. That's what this is all that. Selective, well informed tradeoffs.
Edits: 03/06/16
Hello Members,
new idea,
a small easy double horn satellite,
down to ~90 Hz,
a little floorstander.
for the new DH Bassel, Armchair.
any opinion?
hm-moreart DIY horn speaker
http://www.hm-moreart.de/1.htm
I would try a floor firing horn before I'd try this. Pointing the exhaust into the floor converts the area between the floor and the horn (circumference times the distance to the floor) into horn's mouth. And if you maintained the proper flare rate, this would allow for a shorter horn which in some cases is critical.
Hello,
i done with my KANGLING Horn, but i got no armchair.
at the end of a bass horn the flare rate is not important, better make it bigger as needed it is always to small.
look my ALPHORN for example.i misunderstood you write about the DH SAT, sorry.
the DH SAT horns work up to ~400 Hz, downfire bad voices
direct = to much, indirect i think the best way, like the SCHALMEI SAT
hm-moreart DIY horn speaker
http://www.hm-moreart.de/1.htm
Edits: 03/06/16 03/06/16 03/06/16 03/06/16
here the single simulations,
how looks the membran movement and impedanz of the sum?
hm-moreart DIY horn speaker
http://www.hm-moreart.de/1.htm
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: