|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
81.233.250.186
In Reply to: RE: Karlsson K-15 soon ready for play posted by moray james on April 12, 2015 at 16:11:45
Dear cousin
Yes, they are K-15s accoring to the original drawings
The only deviation added is a small support between the middle shelf and the back hatch. And also adjustable bas-port doors.
I hade a pair of Beyma 15P80Fe that I will first try
Very high BL
Low Fs
Low-Mid Qts
Hig Vas
We will se what happends
The best to you dear klan-brother
/Pix
Follow Ups:
you may have seen this paper by a German fan of Karlson,
http://home.planet.nl/~ulfman/artic/kkoppler/kkopl_en.html
The Beyma is a monster but the Vas may haunt you hope it works for you, high density fiberglass will provide some increase in driver perceived volume but only of about 25%. Good luck and post results.
moray james
Moray,
The Vas parameter is a bit odd for me, and I Think I need some advice here. Is this value suposed to correspond to the internal box-volume for propper loading of the driver?
The Beyma 15P80Fe has a Vas of 159 litre but I am not sure how to calculate the K-15 volume, since the wings also loads the driver.
I think you are best to do a trial run and see what happens. If the cabinet is too small you will simply get reduced bass output so you can add damping to partially offset. You are not going to get much bass below 50Hz with a K15 so as I said this may not be an issue in the end. See what happens. Best regards Moray James.
moray james
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: