|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
71.113.133.74
In Reply to: RE: Help With Small/Short Mid Horn for EVDH1012A posted by djk on February 12, 2015 at 23:57:41
Could be the combo!!
Follow Ups:
If the mids cqan gio to 1Khz I would consider this Faital Pro horn.
Thank you, DJK!!!
That graph looks great.
If the bolt holes don't line up, maybe I can drill new ones instead of an adapter plate???
Thanks again for the help.
"Ad Astra Per Alia Porci", - To the stars on the wings of a pig: John Steinbeck
Thanks again for the help!!!
I ordered the Faital Tractrix horns today.
Does anybody want the EV HR9040 horns I have?
I'll sell super cheap if you pay shipping?
They are so big, I don't know what to do with them.
"Ad Astra Per Alia Porci", - To the stars on the wings of a pig: John Steinbeck
You need to order the LTH-142 horns to fit your EV drivers.
The Faital Pro has a 1.4" entry with a four-bolt four-inch bolt circle.
The Electro-Voice DH1012 is 36mm, 1.4" exit with a 3.5" bolt circle.
You might be able to re-drill the horn without making a plate.
If you mount it in a sealed box you may want to add an extra mounting screw to the bottom edge, right in the center, and the same on the center of the top edge.
Thanks again for all of your help DJK and others..
The new horns were delivered and they sound amazing.
It was necessary to drill new holes to adapt the EV DH1012A driver, which turned into somewhat of an adventure, but, other than that I could not be happier.
The FaiTal Horn has a metal mounting plate; I was expecting the horn to be all ABS plastic. This made drilling the holes for the driver a little more of a challenge but it all worked out okay.
Thanks again.
You guys are the best!!!
"Ad Astra Per Alia Porci", - To the stars on the wings of a pig: John Steinbeck
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: