|
Home
/ FAQ
/ News Classifieds / Events |
Audio Asylum Thread Printer |
Get a view of an entire thread on one page |
24.29.24.226
| '); } else { document.writeln(''); } } else { document.writeln(''); } } else { document.writeln(''); } } // End --> |
In Reply to: RE: You are preaching to the choir.... posted by tubesforever on July 02, 2009 at 00:27:00
B&C 8PE21 8" Midrange sourced from parts express. The reason many people like horn drivers is there is NOT a lot of cone movement in proportion to other drivers hence LOW distortion {almost like we are shooting for a speaker with no moving parts..............ala electrostatics which is why they have to be so big to play loud and or deep} The less a driver moves................the less distortion can occur ........contrary to what car speaker manufacturers would have us believe. 20 HZ is 20 cycles per second ............... I am not sure my eyes can witness a diaphragm moving back and forth 20 times in one second...........and that is for the deepest bass most guys strive to achieve for complete bandwidth. Here is where I make my compromises........{even Paul Klipsch did} as my Khorns only go down to 35 hertz. For efficient bass to 20 HZ the cabinet would border on encompassing half the room. Someday I will install Altec 511's for the all important midrange in the Khorns. My idea was to hand off the driver I mentioned above to an Aurum Cantus G3Si Ribbon. I lose the ambience from a dipole design but all in all gain the SPL's and dynamic range of Horns.............everything is a compromise.
"The Sound of One Hand Clapping is Crashing by Design" HKM
Hmm... Bedini 100/100 is one of a nicest SS amps I heard.Bassy , warm and with decent tonality.I borrowed one from a friend.The amp was old and PSU really needed update but still sounded surprisingly good.My friend have tons of other amps but he didn't want to part with this one ;0)
I have a 2 pairs of unused B&C 8E21E drivers from parts express still in boxes gathering dust if anybody is interested.I wanted to swap one pair for faital M5n12-80 without much of luck.
Post a Followup: