|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
108.209.49.136
In Reply to: RE: Rauna Tyr speakers posted by Gary on September 25, 2016 at 06:48:49
Any pictures?
Follow Ups:
The original foam grills disintegrated a long time ago. I replaced them years ago but it's been so long it's happening again. I think I bought these in the mid eighties.
I looked them up online, saw these and other models, I like them. Those open cell grills always deteriorate into a powdery substance, I might consider running them sans grills, could always either paint, or coat the concrete enclosure with plastidip or some similar product.
Martin
OK but be aware that on both of mine the adhesive for the top and bottom plates dried out. Both plates on both speakers fell off. Not surprising on a speaker this old. I reattached them with Gorilla Glue. Mine are the original version, with the speaker connectors (banana only) on the underside of the speaker. Unless you use thin cables that will fit in the channel on the plate, you have to put something under the speaker to provide enough room for the cables.
They're nice speakers. That's why I've held on to them for so long. I used them with an NAD 3020B, which I also still have. Good luck and be careful not to drop one of these little guys on your foot. It's an experience you'll remember for a very long time.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: