Welcome! Need support, you got it. Or share you ideas and experiences.
98.119.64.254
Good Day Brian,
I was wondering as to what happened to the Next Generation COLE LCR phono pre-amp from a blog you posted back on 26 Sep 2008? Is it still in the workings, and will it ever make it to market? I am very interested in it to finish off my system. Also the remote control version of the DJANGO TVC is it still availble or not? Thanks for all you offer to the DIY users.
Richard Basaker
Cole LCR-Bamboo. The bamboo chassis's are sitting unfinished in a wood factory for the last 6 months. Like so many things it needs me to go up there and chase it home.
Unfortunately when we only do runs of 50pcs at a time we become very low priority.
Django with remote: something is in development. We are about 75% there. Uses vacuum silver contact relays and sounds as good as Seiden.
Thanks for watching what we do.
regards
Brian
DIY - Done Right!
Thanks Brian for your quick response to my message. So it sounds like you will produce the Cole LCR-Bamboo in due time? If so, what due think it will be priced at? I just want to be ready with my money in hand to purchace this item before it is gone. I think it will sell very well when it hits the market. I also have friends here in the States who are interested in this product. Also do you have a price planed for the Django with remote?
Thanks again,
Richard Basaker
Richard, you will find your answer just a few posts below yours! Check out the "Vinyl Song" thread.
kingsfan, this is not the same phono pre-amp I was asking about. Brian had photos and info on a new ultimate COLE LCR using 4 6922's using only 1/2 of the tube 2 per channel and tube power supply, and had a bamboo cabinet. It was in a blog dated 26 SEP 2008. Register / Login
DIY HiFi Forum
A Little Teaser -- Left over from the Panda
218.189.230.78
--------------------------------------------------------------------------------
[ Follow Ups ] [ Post Followup ] Thread: [ Display Email Next ] [ DIY HiFi Forum ]
--------------------------------------------------------------------------------
Posted by bcherry (M) on September 26, 2008 at 01:47:55
Sometime ago I mentioned that we would be using more bamboo in our products. You may have seen the Feastrex speaker box that we had made -- it worked out very well.
This is what the next-generation Cole LCR will look like:
Side and front are solid cabinet-grade bamboo wood. Top plate is anodized black 3 mm aluminum. you'll notice that there are four tubes instead of two.
Actually, we are still using the same basic circuit except now we are paralleling the two halves of one dual triode to use it as one tube per stage per channel. This allows us increase the anode current to about 20 milliamps total for the two which gives us an even flatter frequency response due to a lower output impedance to drive the LCR and whatever is on the output side of the phonopreamplifier.
We are just building this one now and will report more as we get some results. I do know that the chassis material, especially when low-level signals are involved, as a great impact on the sound. The power supply box is still outboard however we are now using the 5AR4 rectifier tube mounted in the outboard power supply box. The box is made from aluminum plate so no more problems with magnetically induced vibration. All the AC voltage will stay within the box as we will all see use one of our filaments applies to drive the leaders of the dual triodes. We will also be using our all film capacitor universal power supply module (with one extra RC section at the end) which will be placed in the main unit.
Regards
Brian
Take control! DIY.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Follow Ups:
--------------------------------------------------------------------------------
Post a Followup:
FAQ Post a Message! Forgot Password?
Moniker (Username):
Password (Optional):
Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:
Message: (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies: Automagically notify you when someone responds.
To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.
--------------------------------------------------------------------------------
[ Follow Ups ] [ Post Followup ] Thread: [ Display Email Next ] [ DIY HiFi Forum ]
[ Comment ] [ Edit ] [ Delete ] [ Copyright Warning! Click for Details ]
--------------------------------------------------------------------------------
[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2008, Audio Asylum, all rights reserved ]
--------------------------------------------------------------------------------
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]
--------------------------------------------------------------------------------
Post a Followup:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2009, Audio Asylum, all rights reserved ]
[ Go Green ]
[ Take5 ]